Damaged filter Toyota Camry.

Golovna

The filters that are installed on Toyota Camry 40 cars with 2.4 and 3.5 liter engines have similar materials, but different dimensions and shape.

For this reason, the causes of the stench are not interchangeable.

An original air filter with article number 1780128030 is installed on a Toyota Camry 40. The cost is around 700-800 rubles.

When sent to an official technical service station, replacing the element that filters can cost close to 2000 rubles.

UVAGA!

Don't believe me?

An auto mechanic with 15 years of experience has never believed it, never tried it.

And now you can save 35,000 rubles per river on gasoline!

The filter is made from synthetic material.

1. It has a frameless structure.
2. The source is the Japanese company Denso.
3. For the American market, the company produces filters with article number 178010H050.
4. They are very similar to the original, but the price of their item is 900-1000 rubles.
5. Good analogues and their characteristics are indicated in the table below.
6. The filters are dirty, so they get stuck on the Camry 40 with a 3.5-liter power plant

On the Camry 40 with a 3.5-liter power unit, a filter with article number 1780131120 is installed. The filter is shaped like a connector designed for a 2.4-liter engine.

The quality of the filter element starts at 600 rubles and ends at around 750 rubles.

• Remove access to the engine compartment.
• Disconnect the negative terminal from the battery.

• Remove the cover from the filter housing.

• They are very similar to the original, but the price of their item is 900-1000 rubles.

• For this purpose it is necessary to press special fixatives.
• Close the case.

Turn the negative terminal of the battery around.

The recommended replacement frequency, depending on the tire vents, is 20,000 km.

In this case, it is necessary to be competent in the operation of the car.

It is important to control the skin filter level 10 thousand. km. mileage

When replacing the air filter on a 2.4 liter engine, there is a risk of losing the bolt securing the cover to the housing.

This type requires a spare fastener with article number 9009904593.

When replacing the filter element, it is important to use it before cleaning the filter.

The following sequence is given for the following trace:

Updating the filter element

To determine the surface area of ​​the air filter, most car models have special sensors.

They can be mechanical or electrical, which display information on the control panel.

However, in a number of cases, the working surface of the engine air filter can be inspected by visual inspection.

It is not necessary to check the terms of routine maintenance in order to carry out this operation.

The inspection and, if necessary, replacement of the replacement element of the air flow filter on a Toyota Camry, if necessary, can be carried out independently.

For whom there is no need to resort to advanced technical fachivs - you need to get the most power, a little technical knowledge and a minimal set of tools.

By regularly inspecting and replacing the engine air filter, you allow your car to “run on its best” and show the stated strength. Once you have checked the filter assembly and do not yet need to replace it, you may be pleased to perform mechanical cleaning of the replacement element. It can be done with the help of a vacuum cleaner or in the flow of a compressed wind.

The air filter box cover on this model is secured with special fixing clamps - open them and remove the filter box cover.

Here is a replacement element of the engine air filter.

Remove the old filter, carefully clean the filter box from the filter and place the new replacement element in the seat, using the markings.

After which you can, with a clear conscience, close the cover and start the car - your engine runs clean.

The time has come to open the hood of the car and get to work. A car enthusiast who doesn’t know how to install a car will ask: “Where is the filter removed?”

At the box - in the photo near the center:

Place 3 clamps on the box (without force, by hand).

Lift the lid of the box, slide it to the right and remove the filter that needs replacing. Install the purchased filter, remove the cover back and secure the structure with clamps..

The loan process is repeated at maximum.

In the first part of the hour you will spend, distributing the packaging to the virobu.

Have you ever wondered which side the filter should be on the box?

Place it like this to read the marking (div. photo 1).

Frugal minded people will clean and remove the clogged filter.

We respect the procedures as ineffective.

For normal work, a trace should be made

A similar problem occurs in traffic jams in Moscow - although microscopic particles of soot are invisible to the eye, they are visible to the eye by the gray-black deposit on the filter curtain.

Moreover, the stench filter literally leaks through: the deposit is visible even on the folds of the curtains, where the average saw does not penetrate.

The horizontal installation of the cabin filter in all cases is sensitive to the ingress of organic matter (saw blades, poplar fluff, leaves) - when exposed to moisture, this will quickly lead to increased rot, such a filter will have to be changed, as appropriate n still may not be clogged with a saw.

Select cabin filter

When selecting a filter, Plutanin selects those between the same model range, but at different times, different filter numbers may appear in catalogs.

• Tim is no less, in practice the stench is of the same type, so to look for analogues you can search for number 87139-50060 or 87139-30070.
• Moreover, depending on the number, the price of one and the same filter, in fact, can significantly increase, becoming from 1300 to 2300 rubles - but in any case, depending on the frequency of replacement, this price cannot be named ati adequate.
• Therefore, with great respect, analogues of the original filter deserve credit:
• TSN 9.7.153,
• Filtron K 1210A,
• Sakura CAC-1114,
• MANN CUK 1919,

Blue Print ADT32522,

Mahle LAK 490,

Fram CFA10322.

Instructions for replacing the cabin filter on a Toyota Camry

The replacement procedure is simple, just use your hand and no additional tools.

Initially, it is traditional to remove the glove box from the border, lifting it down.

Then, pressing on the sides of the glove compartment in the rear part, we remove the edges from the slots in the plastic.

It’s better not to let them stick to the lining - they’ll get dirty marks.

In cold weather, the interior needs to be thoroughly heated - the plastic will become soft and pliable.

Behind the thrown-up glove compartment, the cabin filter cover is miraculously visible.

Having filled the volume of the box yourself, we gently pull the balloon tube out of the drainage and turn the drainage in place so that the debris that comes with it drips over the boundaries of the body.

When the air conditioner switches to recirculation, the air flow at low fan speeds is directed to the feet.

Make sure that some of the wine flows into your feet - the grain will be collected on a squeegee, so it’s time to place the containers.

There are often crowds of people drinking and drinking on the street, the purchase of which in the car is important for a comfortable ride for the driver and passengers.

• The working surfaces of the filters, which control the process of airflow penetration, become clogged and require replacement.
• As a result of achieving optimal power, a car that is often malfunctioning has to spend significantly more fuel resources.

As a result, we experience not only significant savings, but also wear and tear on machine parts.

The damaged filter of the Toyota Camry is not to blame.

Most transport features include the presence of sensors, which can be equipped with mechanisms of any type.

In case of singing cases, a detailed verification can be carried out, including within the framework of an independent visual inspection.

Functional features of the element

1. Passage of air through additional filter walls as required by the engine.
2. Filtration of sawdust particles to ensure normal vehicle operation.
3. The frequency of replacement plays an important role, since the problem of noticing this part is relevant for auto manufacturing and imported production.

The principle of dii

For 1 kg of fuel, the engine can handle approximately 15 kg of fuel, which affects the vehicle body.

Regardless of the weather or other factors, in any situation saws, stones and asphalt particles penetrate into the unit.

Detailed instructions can be viewed in the video.

1. Certain points of particular importance will be highlighted within this article.
2. Also, replacing the air filter on a Toyota Camry V40 involves several stages:
3. Open the hood to remove the filter housing, which is secured with the help of fixing clamps.
4. The stench may be opened, after which the required element will become redundant.