Tuning a boat grant, photo tuning with your own hands.

Transmission Car Lada Granta It is one of the most modernized parts of the domestic automobile industry. How can I tskat you?

Danish car

, all details about tuning the Ladi Granta with photographs can be found in this article. Tuning the Ladi Granta engine The Lada Granta model that is being produced has a standard average tuned engine, so performance can be increased for the amount of tune up

chip tuning

Fortunately, as soon as they come out of the conveyor, there may be a few of the filters and some of the debris can already be replaced after the first break-in of the car.

The accelerator pedal is weakly depressed, the traction at the bottom is mediated, the car itself switches to the hard mode only after the driver presses the pedal all the way.

Waters want to stop the tension at the exit early.

The tightness decreases significantly after turning on the air conditioner.

This problem occurs after minor changes in the high-pressure stage of the engine. Changes are made to the intake-exhaust elements, the SHPG parts are replaced, the split shaft is re-adjusted and the working volume of the engine is significantly increased. The manufacturer first re-calibrates the engine controller, which adjusts the industrial engine firmware of the car. Tuning allows you to change the fuel consumption, increase the efficiency and tension that the car has at early stages, as well as reduce the torque to turn. Such a change can be carried out easily at high speed, without throwing the body on its side.

The extensions of the pillars can be installed on the Lada Kalina model.
In addition to the standard settings of the chassis, the suspension and shock absorbers can also be changed, which are initially replaced with a similar option for the Lada Granta before rolling out.
To lower the car's suspension, you can use a number of methods. This is replacing the standard suspension with a suspension with ground clearance, which is adjusted, which gives autonomous stiffness to the shock absorbers. The car can be lowered and the jack raised without any problems.
The cheapest and most reasonable option is to replace the standard suspension with a new, low-slung one, which is combined with a set of new springs and shock absorbers. Tires, or more precisely, their replacement with.
low-profile huma

, allows you to lower the suspension, car and paint the car without compromising comfort, with the correct amount of rubber and disk base.

It is possible to cut the coils on all the springs of the Lada Granta, which will remove the original shock absorbers, thereby reducing the suspension to a low level, in order to avoid further problems in the operation and durability of the chassis, as well as in

comfortable ride Lowering springs are often corrected, even without changing the shock absorber base, which can only be corrected when driving frequently in the middle of nowhere, and not off-road..
External tuning of Ladi Granta
The Lada Granta has not yet been able to gain a foothold in the current automobile markets, as they immediately began to realize, and the most external aspects of the car have come to a head.
Tuning of the external side of the model is completed in many directions. The railing part of the upgraded exterior bodywork is modified both for the purpose and for the level of aerodynamics, which in some cases can correct minor problems in the control system. In addition, there are further aerodynamic considerations for stabilizing the car at high speed.
The color and shape of the spoiler is determined after marking and reading the color from the base of the car body. The Lada Granta comes with standard manually adjusted mirrors, which causes no problems. They can be replaced with analogue ones from Ladi Kalina, which are connected to additional electronics, which also have a pre-heating function, which is especially problematic during condensation, even due to strong temperature changes.
They sacrifice a little in size and standard Grand mirrors, but in reality it’s practically impossible. Since the electronics of the mirrors are not required, it is possible to install preheaters on standard stock mirrors internal part
housings without replacement.
Unfortunately, the standard equipment of the car does not include a molding, which can be uniquely distinguished

external look

. The benefit of such an improvement is pleasant; the work can be carried out independently.

To attach new moldings, you just need to wrap this part on both sides of the body, take a grease remover and double-sided tape for fastening. For a smooth look with the color of the body, the moldings are made according to the design. Changing the fluid supply system that washes involves tuning the outside of the car, but at the same time you can solve the problem by delaying the fluid supply, which is what squeegee cleaners suffer from when they work first in dry mode i.

Prior to negative changes to the body design, there are numerous vinyl stickers, which appear to fragment the picture of the overall styling of the car, and often cause more laughter. Fari for Lada Granta The car only has one light on the taillights, which makes it uncomfortable when parking across the street.

The problem arises by replacing the light bulb with a xenon with a brighter color and a darker blue color.

For which you need a standard xenon lamp of the H1 5000K series, which is produced by various companies.

Tuning especially the rear headlights can be done as a result of tuning, which is still not in compliance with the law. The work of dimming the rear lights does not differ from tinting the original glass and can be done manually. In this case, removing the headlights is not necessary, but just using a hair dryer to create a vacuum between the headlight and the tinted film is sufficient.

Bumper tuning The incomprehensible bumper from the creators of the Lada Granta attracts few people, aka, fragments given model

I came out with my friend a long time ago, you can already find a lot of parts on it, and the bumper itself needs to be cut.

The first thing that comes to mind is the extension of the “I am a robot” bumper, which perfectly matches the fastening parts of this model, but the price of the front and rear bumpers is high, as well as delivery.

It is much more beneficial to increase your respect for tuning for the additional STM bumper. This is due not only to its uniqueness, but also to the abundance of water problems.

In addition, there is cold and cold

The radiator mesh of the Lada Granta does not completely protect the car engine, especially in the summer, from dust, fluff and comas, however insignificantly, but it can be caught like in the air, or simply stuck on the radiator And it doesn’t look aesthetically pleasing.

The problem can be caused by tuning, but it can also be caused by self-tuning.

You can bleed the radiator yourself using an additional aluminum mesh and further installation between the first and the other sheet of the radiator, giving better protection from the heat.

The workability of such work is reduced to a minimum and everything can be done with your own hands by securing the mesh with additional glue or fastening.

Tuning the front panel of Lada Granta Lada grant, in principle, like the car model, comes in different configurations. Just as the front panel of a luxury car class looks distinctive, unique and immediately remembers its uniqueness, then the axis of the primary class, the panel at the front is more draped, and lower. You can change the design with additional tuning of the front dashboard, and do it yourself. The work should be carried out in an area that is well ventilated and at a temperature without changes.

You can adjust the lighting in the luggage compartment, which is clearly not visible in the dark of the night, in order to find the required item.

The most advanced way to improve lighting is to replace standard lamps with LED lamps, otherwise, as the light becomes larger, we cannot reach all required areas.

The pattern for this type is a light-colored stitch, which is best done around the perimeter of the upper walls.

Tuning the Ladi Granta salon As a rule, tuning the interior always starts from scratch, and it’s not easy, even though it’s a matter of direct responsibility. The kermo can be easily changed by purchasing a new kermo in the required configuration, or you can make everything manually.

Sheathing kerma hide, as a rule, is not such an easy job, because you want to change not only the frame, but also the spokes. You can do everything yourself, but you need to remember about those who have to remove the pattern from the kerma for the correct fitting, and only then have to sew the skin on the kerma. For the first time, use a ready-made kit, which is as simple as the one installed.

You can radically change the interior only if you rework the entire upholstery, but due to the price and foldability of the work, few people can afford it. The shortest option If you buy covers, it’s more important that you choose to go to the market to cool down any kind of water.

Model cases are distinguished by their clarity, for the size of what is measured according to the pattern.

As it has become clear, the fabric is prepared for a specific model in wealthy ateliers, where consideration is given not only to the shape and size of the seat, but also to additional factors, such as armrests and the reclining of the back of the chair.

Such covers do not bunch up on the seat and fit snugly. Universal seat covers are famous for their price and variety in the automotive market. The material is often used as elastic fabrics for upholstering chairs, but, as a rule, the shapes are not maintained, and the elasticity of the fabrics does not help.

Continuous problems with collections cover the loss of durability. Khutryany withered also, as well as universal, may be different on models. different type , Ale stinks can serve well and help create comfort. It works well with a removable brush, which prevents the seat from sweating and the winter from freezing.

When choosing khutryan shanks, pay attention to the yakness of the khutra.

The final touch is the improved lighting system in the rear passenger seats.

Tuning of the light base, which will be installed on two lampshades, on the sides of the rear window pillars.

You can install them with your own hands, just know the correct position between passengers and light in the middle to avoid discomfort.

The additional light fixtures, as a rule, can be removed from the door handles.

For this you need no more than two LED lamps with a 4-LED square board. A base is removed from the lamps and plugs are installed in the handles. The plugs can be replaced with embossed parts from the diffuser lamp, for a clearer lighting effect or, for example, for additional focusing on the focal point.

Tuning door panels

Door panels are often subject to tuning, but the methods vary. The first and most extensive process involves covering the panels with a skin or a skin backing, and at the same time the work is done to create an overlay that looks like bungy and curved shapes, on which it is problematic to install the skin., you need to turn on relay K2, which indicates this process itself, and install a jumper between 30 and 87 contacts, for the operation of the actuators in any machine mode.

It’s no secret to Grant’s followers that the gas pedal is on, the car is controlled by electrics, but not everyone has the same behavior, and it’s sluggish at the right time, poor dynamics or failures. If only one person drives the car, then everything can be done by changing the ECU firmware to add grease to the gas pedal. If you have been driving more than one car, then for comfortable driving it is recommended to use a gas pedal booster, or what is also called a jetter.

This device creates connections between the gas pedal positions and

throttle valve

, which often does not respond to pedal pressure, but after tuning, it dynamically reacts to the first steps to the pedal, adding to its tightness and harshness.

Lada Granta is a modern car of a new generation, which is already clearly distinguished from its predecessors, which rolled out of the assembly line of the Volzhsky Automobile Plant dozens of years ago. However, since adrenaline is running high in the blood, we can’t find the place of a wild fantasy in our head, because we are constantly afraid of something new, giving our car up to change, then it doesn’t matter how many rocks yogo car. All the time until Ladi Granta is carried out with one’s own hands, it grows with the incredible power of dota, until such dreams are realized in a regular relationship. Proven experts can say that the modernization of the Ladi Granta’s interior can be done without any special complications, and the final result will be extremely pleasing. In one “short” of completing the birth of a new business and then upgrading your car, it will be difficult to get back to what you have achieved, and there will be no time left for completeness.

Improved aesthetics for the Lada Granta interior Foreign cars come from the minds of Vlasniks second-hand cars its wonderful interior design, the presence of many bright details, brilliant devices..

It’s not at all surprising that the decision to carry out tuning for the salon takes a lot of time.

If you have a Lada Granta in your possession, the tuning salon will receive the best results from any changes internal devices auto.

Zokrema, you can change the head element, in addition to this, caravanning is carried out by motor transport.

Around the hairwear you can install a sports kermo, which is accompanied by a smaller diameter.

However, such projects are not available to all auto-hairdressers; decorating with a small kerma is sometimes simply not easy, so we recommend that you quickly use an alternative method of decorating the kerma. The kermo can be covered with leather to enhance its attractiveness. However, it is important to understand that covering with leather is not entirely easy.

For whose needs singing is a practical skill.

Some car dealers recommend using the simplest method that transfers stagnation already

ready-made kits

for lining kerma.

It is very easy to install, sew up with threads, and, if necessary, just dry it up.

If you wanted to modernize your Lada Granta car with a liftback body, tuning the interior should include and modernize the lighting system, since the generator has become weak.

To enhance this, you can select a number of nutrition options, but most of your meals depend on installing LED lighting.

For whom it is your fault, it is clumsy to follow the singing algorithm. The first thing we need to do is dismantle the old lampshade, after which we can remove the diffuser. From behind, you can add one light strip for approximately 18 lamps.

Now divide this stitch into three equal parts, after which, using double-sided tape, attach all three parts to the inner space of the lampshade installed in the cabin.

Lost to connect

light-colored lines to the darts that are displayed for connecting the lamp. Do not forget to ensure that the LED light is polarized, so when connecting, it is important to follow the instructions.

In order to complete the installation of LED strips, do not simply check the performance of the lighting system in the cabin, but also “ring” with a voltmeter to prevent short circuits.
If you notice any signs of this, do not hesitate to recheck the correctness of all contacts.
Tuning dashboards and panels
An important element of the interior is the panel, which will actively enhance the aesthetics.
internal space

salon.

Before speaking, do not overdo it with applied furbi, or, more precisely, with multiple applications of balls, the fragments may cause unnecessary leaks on the panel of accessories, which obviously will not help improve the aesthetics of the interior.

Finally, if the furby ball is still dry, coat the painted panel with acrylic varnish, let it dry again, and then proceed to assembling the dashboard.

The control panel on the Lada Granta is accompanied by light-emitting diode lights, but they cannot compare due to their intensity with those installed on foreign cars.

If you want to create a control panel with the same bright and sparkling lights, you can pull out the light-colored lines installed by the distributor, and then install those that you can find in the auto shop.

The result will be stunning, as soon as the settings panel will light up, and your mood will be lifted from such writing.

Dodatkova modernization of the salon

You can enhance the interior of the spacious interior of your beloved smart friend with your own hands by going as far as changing the paneling, door trims, and underlays. This process is accompanied by significant financial costs, as a result of which a large amount of autotextiles has to be purchased. You can bypass such a replacement, since the old upholstery in the interior remains intact.

It will be entirely enough to thoroughly clean all trim parts using regular auto chemicals.

The seats are also cramped and resolutely look around for their damage.

If there are other defects, they can be decorated. If the defects are extremely large, it is better to add or sew new covers for the seat. seat.

After you have successfully secured the headrests, reinstall the backrest in place, securing them with all the fastening elements.

There are a lot of car owners who need to complete the tuning of the interior with their own hands, but in most cases such actions will not provoke additional excitement.

Fueled by the impressive results, the automakers are starting to make more changes to the interior of the cabin, and it really works.

If you truly love your “sweet friend”, don’t be lazy, give him enough respect, then as a result you can get an original tuning car that will definitely not be equal to anyone. This approach will help resolve the problem on all thermostats except Luzar products. Reverse lamp box Standard lamps reversing

do not satisfy the needs of the rich rulers of Ladi Granta.
It’s especially bad when it’s dirty
weather minds

, for example, in heavy weather or in the fog.

The Chinese manufacturers never ensured the needs of motorists during the design and production of cars, which included only inputs from the regional government and the relevant ministry.

Ale Rinkova Ekononika introduced her cherkettivtiu, now Kerivnitsta in Robot is actively vicoristovo dosvіd Vorosnikiv Avtomobiliv VAZ I namahavati at the vibration of constructive propositas, and the VID of them. For example, the number of calculations due to the improved design of the Granta models, identified by the authorities of these cars, is significant, and the company's service is expected to be completed in the near future. What should we do if we have already acquired a car and are still struggling with its shortcomings? Seize them independently. Tim more than a lot of them, it’s not easy to fix them with your own hands.

So, how can you polish your half-finished car?

The main problem that plagues the owners of VAZ cars is the lack of money for the obvious “pumping” of their car.

Most car owners are willing to come to terms with them, but even the non-manual mechanics who bring it to their own hands sleek horse!

making necessary changes, saving money and gaining invaluable knowledge from repairing your own car. We present to your respect the approximate plan for carrying out the work independent tuning

car Lada Granta. How to start tuning a Lada Granta with your own hands and where to start refinishing the car. 1. Carefully look at the pipes of the fuel supply system and the sealing cable.

If there is direct contact between them, it is necessary to isolate one type of one.

After this, pay attention to the steam pipe and corrugated fire tube. Tsikav robots with tuning with their own hands are pointed at the statistics.

The firing plant aims to reduce the sagging of the darts as much as possible, as a result of which mechanical damage may occur. To prevent possible damage in the future, it is necessary to change the tension of the wires, pulling them a little from the cabin. 6. Finally, you need to check everything

Galmin tubes

cars, parts of them can be damaged through too close mutual rotation.

To dilute their little bits, you can quickly twist them.

All these simple “boxes” allow you to remove some of the car’s factory defects and prevent serious problems that could be the cause.

Despite the fact that the Lada Granta is well-built in technical terms and comes with a large number of configurations, fans of car tuning will definitely have something to work on.

In addition, tuning a liftback allows you to create a car that meets specific individual needs, adjusting parameters to suit your driving style and other aspects of car ownership.

Especially often, tuning shops for the Ladi Granta Liftback carry out the design of the new shell of the car, which seems boring to rich owners and is not anything special. Tuning first level Before you start tuning the Granti Liftback, don’t immediately start cutting out the hood stuffing. Before the date of the car is a month, run it in and observe its behavior, driving dynamics, and, perhaps, identify structural factory imperfections in order to correct the tune ing. In any case, axles that are new can be added to the car right away: Installation of a new air filter. Having installed
air filter
What Volodya

zero support

Often for car owners, the first point of car tuning is tuning to the Granti salon.

If we are talking about the new appearance of the car, then car owners are starting to carry out new tuning of the liftback by installing it on the body.

Indeed, the massive body part offers a great number of possibilities for modernization.

Tuning the bumper can also give your car a new look, giving it a particular emotional feel. Instead of replacing the factory parts, install updates from the polymer, not only to paint the aesthetic appearance of the stock car, but also to protect the elements that most often suffer from it from corrosion. Tuning the Granty Liftback is important to allow the front end to be more pronounced and cross-legged.

When tuning Granti headlights, most buyers often opt for installing narrow headlights instead of wide factory ones.

It adds special aesthetics

rear lights

, which form the current shape.

It's time to replace the gas pedal

The gas pedal is an element that determines the efficiency of drying and the comfort of driving.

By installing a pedal with an electronic drive in the tuning salon of the Ladi Granta Liftback, it results in smoother pedal movements and greater sensitivity to engine speed.

It is important to forgive the transfer of warehouses through the expansion of control capabilities.

Features of chip tuning

Chip tuning is, rather, a real relish, but a complete necessity.

From the sockets of the electronic unit there is a letter and a number that is required during the reconnection.

Once the flashing is completed, and all the parts have been adjusted correctly, the engine will become more active.

It is best to entrust such a delicate robot, without any doubt, to professionals. Replacing the radiator grille The radiator grille is one of the external elements that are most often subject to tuning.

First begin the modification process and then remove it from the vehicle.

This can be done in two different ways.

The first one receives additional payment
front bumper
, with further tightening of nine nuts, so that you can press on the spot and listen for the fasteners located under the headlights.
Another method allows you not to remove the bumper, the fragments of which will take more than an hour to dismantle, below the radiator grill itself.

The action algorithm this time looks like this:

at the upper part of the grille, six bolts are screwed in using a 10mm wrench; When you start twisting at home, a gap appears there; in the space, once you are satisfied, you need to smear several bolts at the top part and nuts at the bottom, then tighten them with a key of 8; Behind the help of the screws, the locks under the headlights click. How to install arch extensions

Overlays for

wheel arches

, you want to visually expand the size of the car and protect the body from contaminating substances that fly from behind rear wheels, Installation is easy.

The new lining for the new Granty Liftback tuning is 90 mm long.

The extensions are available in a universal size, and a hair dryer is used to install these elements at the wheel of the arch.
Improved sound insulation for the interior or the final stage of tuning
Deyaki koristuvach Ladi Granta skarsya on

low rhubarb

Soundproofing of the cabin against the sounds of bells.

Moreover, the really strong sound increases the respect of the water, as it can concentrate on the dose, which is completely unnecessary.

Vizomat is a material with a coating made from foil. Splen is a polyethylene-based material with an adhesive ball, which will facilitate installation.
Madeleine - a tough fabric material

Materials to dampen vibration, vikorist for metal sheathing several elements car.

The engine, transmission or suspension, under intense vibration, after about an hour begins to squeak and make noise due to the vibration that occurs when driving.

Most often, vibro-clay materials provide a reliable level of sealing, for which the elements for which the vibro-clay material is used will not be jeopardized in any way.

Sound-bearing materials have a porous structure, as well as low thermal conductivity, which makes it difficult to seal adhesive elements in the interior.
Soundproofing materials are often vicorized as an additional ball that is glued to the material that dampens vibration.

Wheel tuning for Ladi Granta

When selecting tires and wheels for the Lada Granta, ensure that the rubber with a low profile may improve the yoke for driving on level roads high profile.

This rule applies only in the minds of yellow road surfaces.

For the Lada Granta, wheels with a radius of 15, 16 or 17 inches are best suited.

Choose a track that comes out of the minds of madness.

Visnovok