Self-propelled traction for passenger cars.

Golovna Auto gadgets and products To transport the great ones volumetric interests in the distant vicinity we heard the sound of vikoristas vantage transport different tonnage, and the movement of heaviness in the middle of a subsidiary state is well suited to a wheelbarrow.

If it is necessary to transport it to the middle distance no longer

overall vantage

.

In this situation, renting a car is cumbersome and requires significant waste of energy, and specially hiring a vintage car is not at all profitable.

For such purposes, a tractor for any kind can be a passenger car, a mini-tractor or a walk-behind tractor.

Everything is presented in a homely, auxiliary state, or, as it were, miniatures.

For example, to transport people in the middle of the state, a wheelbarrow is suitable.

The front and rear sides of the body are new.

The containers are made of flexible parts (which allow them to be transported on a long-term basis), and their frames are made from the same square pipe 25x25 mm, or framed around the frame of the body.

The platforms are covered with a 2-mm duralumin sheet to protect the frame of the body, and the sides are sheathed with thick sheet metal - a 0.8-mm steel sheet. The support is tightened to the mounts with M5 bolts with countersunk heads, and the side trim is carefully (dotted) welded to the frames and posts. The beam of the bridge also has a tubular part of a straight crossbar: it is welded from two new sections of channels No. 5, inserted one into the other.

First, two wheel axles are welded at the ends of one of them.

The beams between them and the channels at the ends were covered with overlays made of steel sheet. The beam is connected to the frame side members behind two springs, similar to the old Moskvich-412 car; This car has 13-inch wheels. The middle of the resors are pulled to the beam by slabs, and their ends are attached to the side members: one for the entire bracket, and the other for the entire shackle. Shock absorbers in the design of a simple vantage poncho

passenger car mobile phone with respect. With such a suspension, the distance from the ground to the platform is approximately 600 mm, which, as operation has shown, is very pleasant.

Dishlo

self-contained reason

dvopromeneve.

Immediately, the idea was born to try to figure out the reason for transporting various brown hospodar's vantages.

After short and productive negotiations involving many bills to the Bank of Russia, these remains ended up in me, and I safely brought them to my place, to the village.

That's all I got.

I already screwed my own wheels into place, fortunately I have Moscow wheels.

In addition, I also got two dented sides, front and back, with folded hinges.

1. Well, I’m afraid that I have prepared this recipe for you. Rear seat
with springs overlooking Moskvich
2. Remains of the old body from the Bdzhilka trailer
3. Two forged gates close to the old gates
4. Restor bushings for Muscovite, Gumov, 6 pcs.
5. Stainless steel tube roll (old curtain)
6. M10 bolts with nuts, 6 pcs.
7. Loops, 4 pcs.
8. Farba aerosol, 1 can, orange
9. Spare device, 1 pc.
10. Moskvich wheels, 2 pcs.
11. Brew machine
12. Bulgarian

13. Kutnik 45Х45 like an old bed, 2 pcs. Traction essential device

It was purchased at a car dealership, first of all to ensure unification, so that it fits all standard towbars, as well as to ensure safety and durability.

I studied the self-propelled devices and could have built them myself, but the smells didn’t inspire confidence in me.

After the first “fitting in” of the bridge and body, it became clear that the stench was not crazy.

There were also cut bushings for a quantity of 6 pcs.

from old curtains made of stainless steel.

After everything has been assembled, tightened and well welded, the time has come to put the machine on its feet, or on wheels, and take care of the remaining folding.

The sides were straightened, new hinges were welded, bolts were installed on the side, and the towbar was welded in place.

At the end of the process, there will be a need for touch-ups (one can of Farby wouldn’t last for the whole process) and commissioning. The maximum capacity of the trailer is not exceeded, but it is easy to transport 0.3 m3 of sand, 10 bags of cement, 200 pcs. targets.

No longer loading, but not for the one who is angry, but for the one whose tractor is an old Moskvich-412, Skoda Yogo. I put everything that is needed on the shelf. Sand, stone, whole, earth, rotten, smittya, choven, shafa, refrigerator,

cleaning the car

, potatoes, hay, this and that.

I’m not going to establish on the basis of the light’s device and register it in the DAI, because it is vikoryst that it’s only time for light to get there and only within the borders of our village, it doesn’t look on the highway, but

maximum fluidity

of this “road train” with a vantage of no more than 30 km/year.

• For this reason, I did not work on the wheels and did not install shock absorbers. For such sweetness there is no such need. and wheels that require steel channels.

• In addition, the rig requires aluminum pipes and high-capacity fastening elements.
• For welding the body, a welding apparatus is required.

If you want to use it, boil the leaves.

Please note the size of the bag and create a chair, which will help you when choosing.

It’s good that you have a stockpile of old parts lying around your garage that stinks of robots.

For example, take the selected elements of the sides from the tractor, and knock the sides themselves out of the lining.

The frame is made from a steel pipe; all you need to do is buy a pipe with a diameter of 40 mm.

Place a pipe of smaller diameter under the rod. Buy three pieces, two of them on the side, and one on the transverse thrust. Don't forget to push the pipe under the bridge beam.

Put tubeless wheels and use shock absorbers from the old Ural.

You need to buy a device from the store for storing the tow bar and an insurance lance.

Then proceed until the safety cable is installed.

If there is no one, vikorist in place of the new one.

Celebrate the evening in such a manner that you don’t get stuck on the road when the crash hits.

Install the coupling, use bolts or weld for fastening.

The welding is important in a reliable way of fastening.

Are you going to work on fastening with additional bolts? Install no more than two.

If you earn more, then the drilled holes at the fastening points will loosen the frame.

Installation of axle and installation of sides

Turn the frame over and place it on two blocks.

Calculate the value of the price, multiply the value by 40%.

I’ll tear it off and put it out from the back side of the hood, undo everything here yourself.

Before installation, clean the frame and frame.

The spontaneous reason, as a factory-type model, is due to the mother frame, which is the basis of the structure.

Its rigidity and softness are important for the durability of the comb.

In order to ensure greater reliability, it is recommended that the elements be welded together by welding.

It is necessary to begin the work by measuring the dimensions of the described element, or more precisely, the width and depth. The size is determined beyond the external boundaries of the warehouse frame. To calculate the end width of the frame, to the distance between the inner edges of the side walls, you need to add the thickness of one wall, multiplied by 2. If the frame extends between the wheels, and not above them, tighten the gap between the bolt and the tire.

If you wanted to prepare your own design, then after determining the dimensions, proceed to the fitting of the frame.

Self-propelled trailers for a passenger car require installation, which can be done with the help of welding or bolts.

Before permanently fixing the warehouse to the frame, it is necessary to check the dimensions of the frame pipes with the grooves of the gutter.

The remaining one is not liable to appear larger than the width of the pipe, the displacement of the dimensions can be a maximum of 5 millimeters.

The welded connection can ensure excellent performance, and in case of damage, dismantling transmits a victorious gas igniter.

The importance of connecting behind each bolt is smaller.

Then tighten the bolts so that they remain in place until the eighth grade. Mensh mіtsnі will not be available to vitrify zusillya na riz. To connect, you need to prepare two bolts, which are no longer difficult to tighten, so that we can accept the weakening of the frame element, as well as the coupling, through the presence of openings for fastening.

Work above all else

Self-propelled, like for a car, it will expand your capabilities. The remaining option can be used for transporting goods, no matter the configuration, the smell is not small. In this case, there is no risk of damaging the car.

Regardless of the fact that they may have their own peculiarities, recommendations, guidance, and restrictions for all options.

As it is a car, a self-propelled reason for a home or car can be obtained

galm system

, as well as lighting.

When it comes to the latest foods, fakists recommend trusting professionals. Registration of the receipt If you are thinking about how to create a reason, then you may need to complete the registration process.

The design may undergo an examination, which is being carried out by the All-Russian Association of Motorists, or SAI for short.

The skin region suffers from suspense.

• To pass the examination, it is necessary to switch over, so that the device meets the current GOST. You can get acquainted with the national standards in the document GOST 37.001., And if you use it, then its price is not high.
• The brightness of the principles themselves is not at a high level, which requires additional investments after purchase to eliminate shortcomings.

The reason for this is the design that the car owner chooses for his seat from a material that is used for the seat, which is subject to GOST standards for the careful selection.

While there is no need to register the registration aspects of such a device, they are much more expensive than when registering a factory one, since additional permissions are required for the operation of a self-propelled device.

If you look at it from an economical point of view, the costs for the same reason, according to the rules of registration, the costs for buying a new one are significantly lower.

It is also important to ensure that the self-propelled principle will be richly clear, lower than factory, so that the entire manufacturing process is controlled by the car enthusiast.

Set of tools and materials First, what is necessary for making a blanket with your own hands, this is an armchair..

It is also important to note that the armchair can be considered

GOST standards 37.001.220-80

• This standard contains all the necessary features to revoke permission to operate the machine and further register it with the Interdistrict Registration and Examination Branch. In order to prepare a self-made cheque, the following materials are required. Profile pipe 40x40 mm for strengthening the frame of the trailer. You can use the pipe
• large size Ale varto vrahovuvat, scho tse cause an increase in the mass of the structure.
• For the sides, it is recommended to thicken the steel sheets to a thickness of at least 0.6 millimeters., if the particles are larger than 1 mm, the fragments can also lead to an unnecessary increase in the weight of the sight.
• For the bottom of the poncho, you can use OSB or polycarbonate sheets.
• The strength of the material is absorbed from the flatness of the bottom of the rack. Metal beam 80x5mm for the rack axle.
• Hub for wheel mounting, directly come from the rear beam of the VAZ 2108
• Two VAZ wheels with a diameter of R 13, R14 for bazhannyam.
• Two shock absorbers from a Ural motorcycle.
• Two car shock absorber springs can be adjusted booths from VAZ 2101 or from ZAZ 969.
• Double wire braided for electrical wiring, approximately 10 meters.
• Side lights with stops and turns.
• The thick-walled metal pipe is no less than three meters thick.
• D for the preparation of the driving element.

Towbar lock.

• We connect this mother to connect the on-board network It is also possible and a simple arc.
• Bulgarian and wheels for carving metal.
• Drill and drill from metal.
• Roulette and hammer.
• Twists, wire cutters.

After that, everything essential tool and material so that when purchasing you can start immediately until the folding process itself, without being affected by the dimensions of the dimensions of the chair.

DIY folding

The cutting of materials for collecting the hood is carried out according to the dimensions specified in the chair.

The structure of a self-propelled principle consists of the following stages:

The wiring is laid according to the same principle, that in a car the minus wire is attached to the frame (mass), and the positive wire to the contact of the light fixture.

How to register a self-propelled title to a passenger car?

For registration in MREV necessary technical passport that virobu number.

It’s clear that we can’t do either the first or another self-motivated reason.

Also, in order to register a self-propelled reason for a new one, it is necessary to produce documents that confirm that this vehicle complies with GOST standards and is safe for traffic on the roads of illegal traffic.

In order to obtain a document on the safety of your personal device, you must contact an accredited testing laboratory.

After conducting low tests, the laboratory's research scientists will obtain (as soon as the tests are successful) evidence of the ability to safely drive traffic on the roads of illegal traffic. This document can be submitted to the MREO and a reason can be placed on the document on legal grounds. We also don’t forget that you have to go to the office where you are busy stuffing numbers on

transport facilities

And only after the number is entered on the frame of the frame, you can begin the process of setting it up.

• Putting the comb on the look In order to register a self-propelled vehicle, the following documents are required:
• Application to the head of MREV
• for registration of the property. Confidence of the individual.
• Registration certificate transport department.
• The certificate of the laboratory allows us to test the principle. on the roads of the zagalnogo koristuvannya (for self-motivated people).
• Documents that confirm the right of authority to the property that is being registered(Confidence of the rahunok).
• Receipts to confirm the payment of the sovereign payment that for the services of MREV.
• Registration reason

This is an act of technical inspection.

1. OSACV insurance policy..
2. Having arrived to MREO, it is necessary to write an application addressed to the boss about the installation of a scheme on the property. As a rule, what is written can be seen immediately from the application form.
3. Payment for services is kept. After writing the application, people see a different structure where it is necessary to pay for the state tax, MREV services and for materials (registration certificate, license plates). Folding documents. After that, the payment will be made and the service receipt will be collected together with

necessary documents

The application must be submitted to the registrar without delay.

After this you can go to the Maidan and check for the inspector who will inspect the property (as is the daily act of inspection).

Please note that if it was added new, then 10 rubles will be credited to your registration from the time of purchase. If the meaning of the term is not met, Vlasnikov will have to pay a fine. OSACV for reasons

• It’s not surprising, but it’s also necessary to buy an insurance policy. However, due to the law on OSACV 2 and 3 parts, not everyone is required to take out an insurance policy.
• It’s not surprising, but it’s also necessary to buy an insurance policy. Private owners of insurance policies for passenger cars, who purchased them for special purposes, have the right not to purchase an insurance policy. Before the flow of caps, like a bath insurance policy
• It’s not surprising, but it’s also necessary to buy an insurance policy. If we are obligated, then the following transport arrangements must apply:
• It’s not surprising, but it’s also necessary to buy an insurance policy. Prichepi

for passenger cars.