Loose wheel rims for Skoda Octavia A5.

Golovna Shiny For most car enthusiasts, do you plan to retrain or change wheels and tires for different sizes - what are the sizes of wheels and tires on the Skoda Octavia A5?

very relevant.

When selecting wheels, it is necessary to check

standard sizes

and the characteristics of the car.

Axle table with recommended VAG transmission dimensions:

For Octavia A5 To correctly select the tire width to the rim width, you need to know the TYPE OF TIRES AND DIMS J - rim width in inches

R - disk diameter in inches

5x112 - number of bolts (5) and the distance between them PCD in mm (112)

E.T.

disk drive

y mm

DIA - diameter of the central opening in mm

What kind of wheels fit the Octavia?

Skoda Replica Replay SK105 6.5×16/5×112 D57.1 ET50 – Skoda line.

They look the same as the original ones, but the price is also about 5 thousand rubles per disc for Draconis, which costs 8,000 rubles.

Raju will marvel at the catalog of Replica disks for Octavia A5, you will be pleased with the very good options nkolesa/diski/replica/skoda/ - marvel at it!
Dimensions of wheel bolts. M14x1, 5x28 cone, head 17mm,
code: 8D0601139D (stamp) and WHT001812 (littya)
What kind of vice to swing?
Nutrition - what kind of pressure is there to pump on Skoda Octavia A5 tires?
The confirmation can be found on the back of the tank flap cover. For the sake of operation, it is important to pump more 2.2 on all wheels (205/55).?
Statti:
- Tire and wheel sizes for the entire Skoda line,
- factory equipment
Replace options

- external parameters of disks, dimensions - bolts/nuts,,
- rear wheel spoiler for Skoda - catalog number,
- Wheel rims - devices and parameters for wheel drive,,
— yak rozciphervati codevane markuvannya,
wheel rims,
- Dimensions of disks to fit exactly on Skoda fl 2011 1.4.

tsi,

- Is it necessary to change bolts during the transition from casting to stamping?

- The rear wheel is wearable on Skoda,

- how to blacken the tires on your Skoda,
Skoda Octavia
Skoda Octavia RS,
Skoda Fabia
Skoda Roomster
Skoda Superb

Skoda Yeti.

Dimensions of tires and rims of Skoda Octavia

Factory configuration - 195/65 R15

Replace options
205/55 R16
205/60 R15

- The rear wheel is wearable on Skoda,

215/55 R16
225/40 R18
225/45 R17
235/35 R19
7×16 ET38
7×15 ET35
6.5×15 ET38
8×19 ET38

Tire and rim sizes for Skoda Octavia RS

Rosemary Shin

- The rear wheel is wearable on Skoda,

Skoda Fabia
Skoda Superb

Skoda Yeti.

Dimensions of tires and rims of Skoda Octavia

PCD: 5*112 Dia: 57.1mm Bolts/Nuts: 14*1.5

Factory configuration - 7×17 ET50

- The rear wheel is wearable on Skoda,

7.5×17 ET45
7.5×18 ET45
8×18 ET40
8×19 ET40

Sizes of tires and wheels for Skoda Fabia

Rosemary Shin

Factory configuration - 195/65 R15

165/70 R14
185/60 R14
195/55 R15
205/45 R16

Skoda Yeti.

Dimensions of tires and rims of Skoda Octavia

Factory equipment
5×14 ET35
6×14 ET37
6×15 ET43

Sizes of tires and rims for Skoda Roomster

Rosemary Shin

Factory configuration - 175/70 R14

- The rear wheel is wearable on Skoda,

185/65 R14
195/55 R15
205/45 R16

Skoda Yeti.

Dimensions of tires and rims of Skoda Octavia

PCD: 5*100 Dia: 57.1mm Bolts/Nuts: 14*1.5

Factory configuration - 5×14 ET42

- The rear wheel is wearable on Skoda,

6×14 ET38
6×15 ET38
6.5×15 ET38
6.5×16 ET38
7×15 ET35
7×16 ET35

Tire and wheel sizes for Skoda Superb

Rosemary Shin

Factory configuration - 225/45 R17

- The rear wheel is wearable on Skoda,

Skoda Yeti.

Dimensions of tires and rims of Skoda Octavia

PCD: 5*112 Dia: 57.1mm Bolts/Nuts: 14*1.5

Factory configuration - 195/65 R15

7×17 ET45
Tuning
8×18 ET40

Sizes of tires and rims for Skoda Yeti

Rosemary Shin

Factory configuration - 195/65 R15

215/60 R16
225/50 R17

- The rear wheel is wearable on Skoda,

Skoda Yeti.

Dimensions of tires and rims of Skoda Octavia

PCD: 5*112 Dia: 57.1mm Bolts/Nuts: 14*1.5

Factory configuration - 195/65 R15

205/55 R16
7×17 ET45

Rear wheel spoiler Skoda - catalog number

1Z0 853 833 - Front left rear wheel spoiler
1Z0 853 834 - Front right rear wheel spoiler

Discs that will definitely become FL 11 rock

Vіdpovid

7-17: 7,5-17;
Hub opening 57.1;
chatter 5-112;
Vilt 45-50.
Guma 215-225×45.
The difference between villati plus minus 5.
If the hub hole is larger, you can buy rings.

They installed 225-45-17 on the original audio discs A6C6.

The width of the front wheels protruded beyond the bridges and covered all the sides with brood (and the car was white, and the roads were Russian and provincial).

They knew it was zreshta.
Who screwed up the licked wheel bolts on the original rims?

Tighten firmly.

In general, if a normal key and key did not help, and the tire service should be thrown up with your hands, go to the service and get it done.

Is it necessary to change bolts during the transition from casting to stamping?

Since everything is original, there is no need to change it. The rear wheel can be carried on a Skoda Yak winesti

rear wheels
just a little bit, as it’s not appropriate for there to be too much stench in the arches.
It's a lie that the car is very loud.
If you really want to, install spacers like this - up to 2 cm near the metal washer.
Placed between the mat and the wheel disk.
Tim brings the wheel himself.

For the price - in the area of ​​3 URAKHUVANNYAM.

I'll add a photo. How to blacken the tires on your Skoda? Costs are rich, seem expensive

• Hi-Gear
• , To the cheap ones:
• glycerin,
• cream-farba for suede Silver (for skin!, Not for suede or nubuck),
• silicone lubricant,
• primary polish,
• cola+glycerin,

special pin for tires,
Shoe polish is the best and cheapest for vuttya.
Glycerin is washed until the surface is smooth, and if carefully, then for a week.

Hi-Gear (pina) - leaks on the disks and is not economical.
Black|Black from Soft99 - the shine is dusky/sticky, but rinses off easily/water comes off with a bang/stands up.
Doctor Wax restorer - natural color / up to the size (!) byduja / water drain is true no matter what.

And not as stable as Black.

Tire wear index correct choice

When purchasing winter or summer tires, every car enthusiast needs to know about the tire fluidity index and wear index, because
All tires have their own parameters.
Important:

New tires need to be “broken in”, since their connection to the road is not yet optimal.
This fact must be taken into account during the first 500 kilometers and the vehicle must be driven with extreme caution.

The method of running in tires affects their service life.

If you don’t know the flexibility and importance of uninsurable tires for your car, then there is no need to wonder.
Problems may arise when the settings are changed.
Discs
6J x R15 ET47 5 x 112 DIA57.1

Doglyad

6.5J x R15 ET50 5 x 112 DIA57.1
6.5J x R16 ET50 5 x 112 DIA57.1
7J x R17 ET54 5 x 112 DIA57.1
195/65 R15 91H/V

205/60 R15 91H/V
205/55 R16 91H/V/W
225/45 R17 91W
Designated:
J - disk width
R - disk diameter
ET - wheel diameter in mm
5x112:

5 - number of bolts

112-stand between bolts DIA – diameter of the central opening.

SELECTION OF TIRE (with manual) The first parameter that needs to be measured is tire size The instructions for your car will indicate the size that will best suit your car. Doctors say that many doctors recommend using the tire inlet with more

wide profile

We do not recommend installing tires of a different size, as some car manufacturers have tested the car in of different minds

and selected the optimal tire size to ensure the safest vehicle operation. Tires of the recommended sizes are trimmed with a full length according to the actual diameter, and if you replace tires of a different size, the mileage indicator and speedometer will be adjusted until the same. It is important for those who use tires to choose their seasonality and tread size.
Summer tires, however, become very stiff during winter and do not provide good grip on the road.

Make sure that the tires you supplied meet international and Russian standards.
Shiny, have you passed?

certification, marked with the letter “E” (to indicate compliance with European standards) or with the letter “DOT” (to indicate compliance with American standards), and in some cases the marking may be offended .
Regardless of the international certification, all tires sold in Russia are subject to a certificate of conformity,

vision of the State Standard of Russia to carry out extensive testing.

The seller is required to present a certificate to the buyer's satisfaction.

The tire wear index should be installed as a reserve, but you should not lack the installed indicators and do not wear the car beyond the permissible wear level.

Table of tire wear indexes

How to decipher coded markings of rims

Wheel parameters A
- The width of the rim, expressed in inches. B - Rim diameter rim
expressed in inches. C
– mounting opening placement diameter (PCD). D
- Diameter of the central opening (DIA), mm. E
- Wheel drive, mm. N
– number of fastening openings. F
- The edge of the landing site. H
- Hump type. S
- Inner surface of the disk. X

- X-factor, mm.
Let's take a look at the marking of the car disk on the butt of the foot:

6½ J x 15 H2 5x100 ET45 d54.1

Decryption of car disc labeling 6½ (rim width)
- Rim width A, which is expressed in inches. 15 (rim diameter)
– wheel rim diameter B, measured in inches. This value is calculated without adjusting the height of the edges of the rim. J (flange)– assigned to the rim edge profile F. J – the widest type.
Also for cars car rims The following types may be found: JJ, JK, K, B, D, P. H2 (hump)

- Ring protrusions H on the rim seat.– the diameter of the central opening D under the wheel mother (DIA), which is aligned with the side of the roller surface.

DIA is one of the most important indicators that indicate the suitability of the rim for the car.

Precise adjustment of the diameters of the landing cylinder and the opening of the disc ensures absolute centering of the wheel.

If these diameters are not the same, residual centering is ensured by the use of finite or spherical shapes in the fastening bolts/nuts and similar openings of the drive. Also in this situation the centering rings become distorted.
As a rule, accurate fit is ensured by installing the original drives of the car.

Wheel parameters Most wheel rims of third-party manufacturers are equipped with strengthening rings in the center.
- The width of the rim, expressed in inches. This is due to such reasons as the clear unification of disks and the reduction in cost of their production - it is much cheaper to provide the disks with central rings, but not to produce products that are not damaged meter of the central opening with a edge of a part of a millimeter.

Rotating of fastening openings

5x100
– number N of openings for fastening bolts/nuts (5) and diameter C of their expansion (100mm).

The diameter of the stake, according to the placement of the opening, is called PCD (Pitch Circle Diameter).

It is important to determine the number of fastening openings for calculating the PCD parameter from the visible distance between the openings and different coefficients (the odds are small below). - Width between the centers of two vessel openings, mm.– the diameter of the brain stake, according to the rotating centers of the fastening openings (PCD), mm.
When opening the fastener, a reasonable tolerance can be achieved in the diameter, so that the bolt fits unambiguously and absolutely in the center of the end straight lines.

Therefore, the minimal dispersion of the centers of the openings between the disc and the core means that a tight fit is ensured by only one bolt - the others, most likely, will be tightened with a distortion, behind the screw of correct centralization.

In this way, when the wheels are wrapped, we will be mother-to-be - once, and otherwise - additionally on the bolts or nuts.(Einpress Tief, German; offset, English) - Disc pitch E: the distance between the surface of the wheel disk mounting and the symmetry plane of the rim, mm.

For every car, this parameter is set by the manufacturer.
The disc pitch can be taken as either positive or negative values, depending on the position of the sealing area to the center line of the rim.

The positive flair of the disk is indicative of a design in which the mating surface extends closer to the outer side of the wheel disk, lower than the middle thickness of the wheel rim.
The gateway becomes a sign of negative meaning.

5x100

With changes in the ET value along the numerical axis of coordinates, the wheels begin to move to the sides beyond the boundaries of the car body - the track becomes wider. Add more wine until the volume starts to sound. Please note, it is permissible to set the delta close to ½ cm.
The ET parameter is not obligatory and may be required for a branded disc. By adhering to the recommended values, you will ensure Rotate safely
wheels in the wheel art and optimal attachment to the suspension and turning mechanism.

Increasing the disc flexure is unacceptable - it can lead to mechanical contact between the disc and the elements. galm system

.
Changing the wine allows you to achieve even greater stability of the car, as well as the doubtful satisfaction of “hanging out beautifully”, but it causes an increase in the shoulder and, as a result, a re-engineering of the suspension mechanics .
Install wheel rims with wine other than recommended, at your own risk!
X-factor

– even a mental indicator X, which means standing between the mounting surface of the wheel disk and its rear surface.

This space itself allows the installation of discs on vehicles where the elements of the trim system protrude beyond the mating surface.
Zimova guma: Kapnor.

Brave the studs.

For the winter, there is no sense of vikorism in Moscow itself.

Roads are quite often covered with chemical pollution, such as paintwork corrosion, which practically doesn’t require spikes.
The pros and cons of these tires:
Noisy.
+ price/yield

What to praise:

Michelin, Capnor, Dunlop, Continental, Ekohama, Bridstone Tigar, a subsidiary of Michelin! The Nokian Nordman SX practically does not make any noise and handles the road well.

Michelin primate 3. Quiet, kindly go along the lines. updated version In 2009, fate was in no way forced to change the sizes of tires and wheels.

The smells are also interchangeable with each other.

R – radial Whether there are other dimensions, they may be considered unoriginal (outdated). Installation of parts, assemblies under the specific compatibility of the power supply, without causing any changes to the series

• technical characteristics
• , and itself:
• Kerovanity;
• Consolidated from the road surface;
• The sharpness and sensitivity of the steering wheel;
• Reduced/increased aquaplaning;
• Comfort of transferring;
• Rhubarb to noise;

Living together with a mixed cycle;

• 2125/50 R18
• 225/45 R19
• Every hour, check the geometry and balancing of the wheel on a special diagnostic stand.
• If damage is detected, restore the integrity of the structure;
• When cracks and dents are repaired, it is important to go to a service station for prevention;
• Avoid wastage in road bumps at high and medium speeds. Regardless of the material, the prepared disc will be deformed and the seal will be damaged; Follow the pressure on the tires, you are not to blame for the recommendations of the manufacturer.

When exhausted, pump up;

Switch to summer/winter mode immediately. This means that the pressure on the tire increases by 0.15 atm, and the pressure on the tire is less for the same amount. The parameters are specified in the vehicle operating instructions;

Systematic polishing eliminates scuffs and scratches.

First clean the wheel, dry it thoroughly, and then treat it with a chemical solution.

Wipe the cloth once or twice with a microfiber cloth.

Keep the wheels in the upright position and do not stick out on each other.

Clean them first, dry them, and wrap them in cellophane.

• Many motorists practice applying an aerosol to the surface before preservation.
• However, this is a special decision of the ruler.
• Decryption of tire markings for Skoda Octavia A5
• Tires manufactured by the factory are also marked on the sidewalls:
• Width;
• Visotu;
• Rim diameter;
• Assigned to the type of construction;
• Vantage index;
• Swiss Index;
• Strengthening the sidewalls, lamellas, which contribute to technical characteristics;
• I will name the edge of the vibrator;
• DOT – encryption code of the generator is consistent with international specifications;
• Markings of the outer sides of the asymmetrical tire;
• M&S - marking, which means the use of gum for sticking on a slimy surface, in the wet, on fluffy snow;
• An eight-digit code that means compliance with the “ECE” standard;
• Tire type: tube, tubeless;

Construction detail;

Name of brand, company; Model; Data about the permissible maximum avantage and pressure.

• Features of the marking of American tires
• With the European alphabetic symbols, gums and disks of water flow more often than with the American ones.
• When choosing and purchasing

expensive materials

• Folding items often vary in size, size, diameter, width, height.
• "P" - inclusive for passenger class; "LT" - category "C", commercial transport; 5 R16: typical American wheel tire designation.
• De, 32 – external diameter in inches.
• 11.5 – width in inches, R – radial design, 16 – internal diameter (inch).
• XL on the sidewalls: the tire is reinforced with nylon inserts to prevent damage when driving;
• Outside: asymmetrical tires.
• It is important to consider this factor before installation. Incorrect installation can lead to deformation of the tread, poor wear, and damage to the lamellas; RSC (RunFlat System Component): the ability to chew rot on a car with
• maximum speed
• 80 km/year with a flat tire;
• Rotation: straightness of the tread.
• Consider this factor before installation.
• The arrow now points straight ahead;
• Tubeless: tubeless/tubeless type;
• Reinforced: high sphericity of gumi when prepared;

Temperature: class of thermal resistance, elasticity at high temperatures; Treadwear: mileage recommendations; TWI (Tread Wear Indiration): gum wear indicator.

As a rule, it is indicated by a red, yellow, or green marker.

Zeleny - careless, yellow - acceptable, red - replacement; DOT: DOT code. For the minds of the world, the style of water, dotrimanya

Swiss regimes The average tire life is 70,000 km. Lithium and aluminum wheels last up to 150,000 km. The establishment of routine equipment and mechanisms will not always be completely and effective. Beforehand, consult with the contractors and become familiar with the benefits of the service provider.

The book shows the maximum permissible sizes of tires and wheels. At the factory warranty stage authorities build as cheap tires, and premium class Moscow.

The tread of the original summer tires on the Skoda Octavia Liftback 1.6 MPI (1Z) 2004-2013 is designed with minimalism to provide acoustic comfort and smooth ride.

However, the weather starts to wear out early or the cold sets in, and there is a need to change the seasonality of the wheels. Selecting the exact tire size for Skoda Octavia Liftback 1.6 MPI (1Z) 2004-2013 Rich tires for Skoda Octavia Liftback 1.6 MPI (1Z) 2004-2013 from the outside looking in very similar to each other.

weather conditions for which the car is used; water type; technical details indicated in the technical passport;

the number of main roads;

The car's maximum power is when it is attracted.

• Nadiyni
• summer tires
• You can buy it in Moscow right away, having checked it in advance, so that the model you have selected will be suitable for all types of the car.
• Winter tires
• During the cold season, it is important that the tires show low levels of traction power due to snowy and icy conditions.
• In addition, before the change in their characteristics, the culprits include:

high-mindedness;

permeability;

miracle against slashing;

durability;