Toyota King disk parameters.

Doglyad Golovna Car brand

Toyota Corolla

- first and foremost for everything, handiness and comfort.

The floating wheel designs follow the manufacturer's recommendations.

• When choosing car wheels for Toyota Corolla, you should focus not only on their aesthetic characteristics, but also need to carefully consider the basic parameters to show the compatibility of the product with car wheels.
• Selecting discs for Toyota Corolla, it is necessary to restore the volume of the engine of the car, fragments of the galvanic system may become damaged.
• It is permissible to remain in this area until the wheel size is set.

Both alloy and stamped wheels can be installed on a Toyota Corolla car.

The model (E140/E150) differs in the variety of colors. Suspension of skin modification has design features that directly influence the choice of virus. Therefore, before adding wheels to the Corolla 150, you will definitely need to check the basic parameters in this section of the factory service documentation.

Wheels for Toyota Corolla

This indicator is the diameter of the opening, which removes the bolts.

When choosing a product, the buyer is responsible for paying attention to the skin parameter. In this case, if the loose structure does not correspond to the modification of the singing mark, then it will not be installed according to the axial principle. External look

transport department

does not change.

This option will have less safety features for a longer period of time.

If you install discs not in accordance with the axial principle, this will negatively affect the suspension and steering system of the car.

This parameter can be adjusted in different ways. As a rule, the main information about the production of discs for different brands, including models, contains the necessary information. Alternatively, calculate the production parameter using the required amount of moisture. Elements that hold 3 doors are 1.155, 4 doors are 1.414, and there are 5 bolts 1.701. Sometimes, to calculate this indicator, use a caliper. Parameters Virobiv parameters Add a trace especially respect

size of the virus.

Aje on

• Toyota car
• Corolla 2007
• model rock
• Wheel rims are mounted at the appropriate size.

All cars equipped with a 1.4 liter engine may

upcoming parameters

: stamped steel wheels with dimensions 6JxR15 5×114.3×60.1 ET39, where 6JxR15 6J - rim width, R15 - diameter in inches, 5x114.3 - drilling, 3. 60.1 - inner diameter I'll open it, ET39 - turn.

Just a note.

Before them you can add cast or stamped parts, the dimensions of which are: 6.5JxR16, 5x114.3, 60.1, ET45, where:

6.5JxR16.

6.5J – rim width.

R16 – disk diameter in inches;

5×114.3 - drilling;

• 60.1 – diameter of the internal opening;
• ET45 – vilit.

You can also see below the permissible intake.

Vilit

The model "Toyota Corolla" E 150 has wheels with a pattern of five openings spread across a circle with a diameter of 114.3 mm.

The diameter of the disk is already known as 5×114.

• The Corolla 150 model with this drill is produced in five types: 6JxR15 ET39, 6.5JxR16 ET45, 6.5JxR15 ET39, 7JxR16 ET45 and 7JxR17 ET45.
• Its width varies from 6 to 7 inches, and the disc size varies from 15 to 17 inches.
• Available in two options: 39 and 45 mm.
• All types have the same shape of the edges of the rims (J) and the radial shape of the structure (R).
• Car production period: 2006-2013.
• Body code E150, E150FL.
• The number of fastening openings and the diameter of the stake of their expansion (LZ*PCD): 5×114.3.
• Auto mat diameter (DIA), mm: 60.1.

Just a note.

Vibrator diameter R, inches: 15-18.

Vit (ET), mm: 30-46.

Recommended width, inches: 6.0-8.5.

Wheel fastening: Nut M12*1.5.

For the Toyota Corolla 150, five types of tires have been supplied by the tire manufacturer: 195-65 R15 91H, 195-60 R15 88T, 205-55 R16 91V, 215-45 ZR17 87W, 225-45 R17 9 Guma for Toyota Corolla has a diameter of 15, 16 and 17 inches. The greatest expansion of the tire model is provided by wear indices and increased fluidity.

These parameters ensure the validity of all models. Regardless of over-insurance conditions, the manufacturer recommends an optimal tire pressure of 2.2 atm. How to correctly select the required size of original alloy wheels for a Toyota Corolla 2008 120 body

Choice of design

• Choose the right one
• wheel rims for “Toyota Corolla” - means including all parameters of tire sizes, rims and fastening elements, which reflect their specifications in terms of model size, make, type of body equipment, as well as engine. The Toyota Corolla of the 120th body was produced from 2003 to 2008 in different versions for the American and European markets: the new generation had little performance in the chassis, was equipped with different types of petrol and diesel units.
• Cream technical parameters In terms of value and reliability.
• For the production of these germs, fakhivits use solid metal using the hot bath method.
• Composite - such materials in manufactured car wheels are used for premium sports brands, where it is necessary to show great importance at high speeds.

The assemblies are the most expensive and combine different materials due to their special design. The parameters of the width of the structure, as well as the diameter, are represented by a very low value. The width can be 5.5, 6 or 7.5, and the dimensions can be 14, 15, 16 or 17 inches. Large-sized wheels can accommodate many motorists who want to change external look

Just a note.

car in

. However, you need to remember that there are always pros and cons of large-diameter disks. There are several models sold on the market, some with 45 mm discs and one with 40 mm.

All stinks are radial in shape and are designated J. Marking of E120 wheels: 5.5JxR14 ET45, 6JxR15 ET45, 6JRx16 ET45, 6JxR16 ET45, 7.5JRx17 ET40. Please make sure to select disks

Serial cars of the new generation are equipped with factory wheels.

Their size should be 13 to 17 inches.

Staff sizes

The disks on the Toyota Corolla 120 are installed side-by-side with the engine type 14, 15, 16 inches.

Many car owners choose engines of great size to improve the running gear of their car. When a car dealer installs the same discs alternately, for example, in winter or vikorist to hard gum.

For winter with dry climatic conditions, tires are made from pulp gum. Summer and winter gum are separated by shape, as well as by the depth of the tread and the appearance of spikes. When purchasing products for cars, it is necessary to take into account the seasonal conditions of use: frost, snow, ice and cake, water, broiler.

winter tires

You can also stitch the protectors with a different pattern.

Recommendations from specialists

Radius R16, R17, R18

For R15 and R16 “Kings” wheels, the manufacturer recommends inflating the wheels to 2.2 bar, both front and rear. For a comfortable changeover, you can try lowering the tires slightly to 2.0 bar.

Just a note.

Not all car owners lower their tires to such a degree, but those who have tried it and confirm that the ride is comfortable are practically not convinced.

Set of summer wheels R16 for Toyota Corolla 2006-2012: original Toyota lithium wheel 6.5×16 ET45 5×114.3×60.1, the tire depreciation rate is set to 25%.

Wheel arches

You can get big ones by car. As a rule, lovers of extravagant solutions can give preference to 17-18-inch wheels. Increase your respect!

Wheels R17 with rubber 215/40 ZR17 are produced in a very stiff size, depending on the rubber profile and the size of the structure.
Its main advantage is durability.
R18 wheels with tire 215/35 ZR1 are lower, so when the structure is installed at a greater radius, the car rises slightly (the clearance increases, as well as the position between the wheel and the fender).
The car is comfortable on 18-inch wheels.
Climb at the maximum rotation of the kerma 225 gum and not the third one, complete the move.
Finally, note that the diversity of the Toyota Corolla wheels allows you to optimize the ride, rather than complicate its choice.
Changing the choice of size can increase the impact on the vehicle's chassis and lead to expensive repairs.

To avoid high financial costs, the dealer recommends choosing
For cars equipped with a 1.6 l engine:
Lithium or stamped wheels with dimensions 6.5JxR16 5x114.3x60.1 ET45, where:
1. 6.5J*R16.
Changing the choice of size can increase the impact on the vehicle's chassis and lead to expensive repairs.
6.5J – rim width.
R16 – disk diameter in inches.

3. 60.1 – diameter of the internal opening
4. ET 45 - vilit
Emotion is acceptable.
1. Vilit ET42.
2. Only for cast and forged wheels (!) the central hole of 60.1 mm can be cut from the standard one on the larger side.
In this case, it is necessary to install plastic centering rings to compensate for the difference in size.
Kriplennya.
When switching from standard stamped disks to cast or forged ones, it is necessary to obtain special fastening nuts from the disk dealer.
Guma.

Size. The following dimensions are installed on the Toyota Corolla 2007 model car: 1. For cars equipped with a 1.4 liter engine.

- 195/65/15;

2. For cars equipped with a 1.6 liter engine.

- 205/55/1 Wheels and tires are key elements of a car's design. Based on the consistency of their parameters, the technical benefits of the car provide not only comfort, but also safety.

The correct selection of wheels can depend on the technical characteristics of a particular car brand.

This glance looks

technical characteristics

wheels of three models of the popular Toyota Corolla.

• Corolla's chatter occupies a special place in this analysis.
• In the abbreviation R16, the letter symbol R encrypts the shape of the disk structure.
• All Corolla models seen here have a radial design.

This means that the spokes pass the radius of the wheel.

The number 16 means its diameter, also in inches.

This parameter indicates the size of the disks.

The symbols and numbers of ET45 encrypt the disk drive parameter.

This value is the distance between the surface that is pressed against the mother and the surface of the transverse cut.

Marking ET45 shows a height of 45 mm.

White Corolla 180 on marked wheels

The Toyota Corolla dealer supplies high-quality alloy wheels.

For motorists, this detail is another element of the car’s design.

Their choice is great, fortunately the market for this product is extremely apologetic.

However, you always need to remember what to do with the factory parameters: the difference, as well as the dimensions, may be undesirable consequences.

Tires 11th generation Corolla

The chosen type of wheel (6.5JxR16 ET45) is confirmed by the size of Toyota tires branded 205-55 R16 91V.

In the Toyota Corolla E 150 model, the wheel alignment follows a pattern of five openings spread across a circle with a diameter of 114.3 mm.

The drilling of the disk uses the already known marking 5x114.

Before speaking, the term sverdlinya is the most powerful technology that opens the doors to sverdlinnya.

Corolla 150 on 19 “forges”

The Corolla 150 model with this drill is available in five types of disks: 6JxR15 ET39, 6.5JxR16 ET45, 6.5JxR15 ET39, 7JxR16 ET45 and 7JxR17 ET45.

Its width varies from 6 to 7 inches, and the size of the disk varies from 15 to 17 inches. Available in two options: 39 and 45 mm. .

All types have the same shape of the edges of the rims (J) and the radial shape of the structure (R).

"Kotkiv" parameters for Corolla 150 - 6JxR15 ET39, 6.5JxR16 ET45, 6.5JxR15 ET39, 7JxR16 ET45, and 7JxR17 ET45.

Guma for 10th generation Toyota Corolla

For the Toyota Corolla 150, the manufacturer has supplied five types of tires:

195-65 R15 91H, 195-60 R15 88T, 205-55 R16 91V, 215-45 ZR17 87W, 225-45 R17 93V

Guma for Toyota Corolla has diameter sizes of 15, 16 and 17 inches.

car in

The greatest diversity in tire models comes from the wear and tear indices, as well as the fluidity, which are the parameters used by all models. However, regardless of overinsurance, the manufacturer recommends an optimal tire pressure of 2.2 atm.

What about wheels for Corolla 150?

Due to these parameters, Corolla tires are unique.

The width of the tires ranges from 175, 195, 205 to 215, which is combined with profiles: 70, 60, 55, and 40, as well as diameters: 14, 15, 16, and 17, which means a unique size gumi skin type.

It is recommended to set the wheel pressure for all types of tires to 2.2 atm.

Guma for Corolli Tire sizes vary depending on the season of use. In this display, tires are presented in winter, summer, and also universal ones.

To ensure resistance to high temperatures for the production of summer tires, vicorize solid gum.

For winter with negative temperatures, tires are made from pulp gum. Summer and winter gum are divided by the shape, as well as the depth of the tread, the appearance of the studs, which are designed: seasonal features operation: frost, snow, ice, ice and sand, water, inflow.

However, to improve the car’s keratinity between the summer and winter seasons, tires should also be provided with treads of different sizes. Here I’ve already downloaded these disks) (photo to the animal) Depending on the size of the tread there are 3 types summer tires symmetrical non-straight, asymmetrical non-straight and asymmetrical straight

Choosing the right wheel rims for a car means taking into account all the parameters of tire sizes, rims and fastening elements, which have their specifications in terms of model size, make, type of equipment Both body and engine.

The Toyota Corolla of the 120th body was produced from 2003 to 2008 in different versions for the American and European markets: the new generation had little performance in the chassis, was equipped with different types of petrol and diesel units.

In addition to technical parameters and dimensions, when choosing wheels, take into account the type of materials used for production - the characteristics of the material also influence the operational efficiency of the wheels and suspension assemblies.

• Types of materials Stamped standard wheels are standard and are installed on all factory-equipped vehicles. They are made of steel, of high quality, uniform shape and modern appearance (their design requires additional decorative caps).
• Advantages of stamping – low level and maintainability: in case of mechanical damage, they can be renewed. Lithium – road version, trimmed and stamped. The material of manufacture is a light alloy, the widest is aluminum.
• Due to the technology of casting and their design can be varied, the aluminum wheels maintain a high value.
• The width of such a disk is on average 20% less than that of stamped steel, so it is desirable for the wheel and chassis of the car decreases significantly.
• The dialing discs are the most expensive and use different materials due to their special design.

Various elements of the design of the dialing disk may have an image character, their design can be very attractive, and is prepared for individual design. At the same time, titanium alloys and composite materials are completely functional and reliable. Types of wheels are selected for car tuning.

Select material type

wheel rims The Toyota Corolla remains largely under the influence of the authorities: since the car does not lend itself to extensive tuning, most drivers choose the budget option of installing simple alloy wheels, which corresponds to their class. Adjustment and disk sizes Kozhen car disk

It has its own marking - symbols and numbers indicate all the necessary settings, markings and technical characteristics.

Knowledgeable layout

specific car

Or by specifying these parameters in the operating manual, you can correctly select the required disk. For example, the marking of a wheel on a Toyota Corolla E120 5*114.3 6J ET39 Dia54.1 R16 means: 5 mounting holes (drilling) with a diameter of 114.3 mm, a rim width of 6 inches, a rim inclination of 39 mm, its diameter 5 tires 16. Symbol scheme for disk size

D – landing diameter: the size of the maximum height of the disc rim from the flaps, where the rim collapses to the highest point.

The international specifications are always measured in inches. B – size, which type of tire is permissible for the installed tire width. This is the width between the extreme points of the disc rim fastening. If the tire has been adjusted on the larger side (the maximum allowable is no more than one inch), then it is indicated as a side, which means: the tire size may be larger at the lower edges..

This size (violet) extends from the central axial line of the disk surface to the core of the queen bean attachment.

Expressed in millimeters, the maximum permissible deflection (the possibility of setting a larger or smaller value) on the Toyota Corolla 120 is 5 mm.

When installing a non-standard fork, make a fitting on the relevant disk: the wheel should not scratch the edges of the arch when turning, or seal the suspension elements and ensure the correct operation of the galvanic mechanisms. Fakhivtsi do not recommend installing a smaller size of the villio, following the recommendations of the manufacturer: with this type, the car is guaranteed to be too sensitive to the steering rods, the steering wheel will not work correctly, the indicator of directional stability and decrease. PCD – the number of fastening to the material openings, their sizes.

The professional term loosening refers to the exact values ​​of the parameters of the openings and bolts installed at the factory, which must be carefully avoided with the same markings on the new disk. Loss here is unacceptable - this parameter depends on the reliability of the disk fastening to the mother. The issue on the Toyota Corolla 120 has one peculiarity: for the American market, the chassis was supplied with dimensions on the machine 5 * 100 mm, for the European market this value was once removed from the standard 5 * 114.3 mm.

Conversation scheme for Toyota Corolla HUMP – parameter for the size of the accessory protrusions on the edge, which serve as a fixation for tubeless tires . Measures in millimeters.

Without having to supply the chassis, Toyota can be equipped with a large size of disks, two to three times as large as the model, model, or configuration.

The downside of such tuning is that the wheel becomes more important, as it does not match the basic humm of the standard profile: there will be more space in the wheel, which will result in more friction. To balance your car, use tuning tools low-profile huma and alloy wheels. In addition, the high-quality aluminum discs allow you to increase the installation diameter without damaging

acceptable standards

• recommended by the virobnik. Here are a few rules for a professional installation: The width of the rim of the disc is 25% less than the size of the tire profile.
• For tire diameters up to R15, it is permissible to adjust the rim width by 0.5-1 inches, and above R16 – by 1 to 1.5 inches.

• For example: to configure the wheel parameters for a 180/60 R16 tire, you need to convert the tire width indicator from millimeters to inches (1 inch = 25.4 mm). Reduce 180:25.4 = 7.68. From this figure, we add 25%, round up and display the required parameter for the width of the disk rim - 5.5 inches.

• Wheel alignment according to the mounting diameter (DIA).

• Larger disks have a larger central opening - this is not allowed by the generator during drying when installing special mounting rings that are required to fit into the installation kit.
• During this operation, the PCD values ​​are oriented: the size of the axis of the mother machine is adjusted to the size of the bore diameter. The presence and size of HUMP. Today, all tires on cars today are tubeless. On the rim of the disk for fastening the tire beads there are additional protrusions, the size of which is indicated on the marking. The ideal choice would be the one for which values ​​are maintained with an accuracy of up to a millimeter (bus parameter and HUMP disk). After installing disks and tires large size
• , the wheels are first checked on a jacked car at a reputable station. When you turn the kerma until it is visible, the edges of the tires are not guilty of sealing the arches, the rims are not rolling with the suspension units and

galmic mechanisms . At this point, respect is lost for the obvious backlash.

As we all know, the suspension system is checked at low speed: roll forward with acceleration, reverse turn along the minimum radius of the front and

in reverse , emergency galmuvannya at the speed. After the end of all minds, a car with new wheels and tires must be checked on a computer wheel alignment stand, wheel alignments must be adjusted, their balancing and mounting rings must be centered whenever necessary.

All work involving track replacement should be carried out at a specialized car service center, which guarantees safe installation. The selection of wheels and tires for the Toyota Corolla 120 can be obtained by quickly significantly increases the level of humility.

A competent choice of tires means taking into account all the parameters, dimensions and indices of their entire operation.

• Among the automotive industry, there are five of the best ones, the ratings of which, according to expert assessments, are at a high level for 20 years: Yokohama is a Japanese holding, an official supplier of tires for large vehicles. car brands , Among them was a Toyota Corolla. In 2017, the company presented a new series of Geolandar tires, which won the top world sales budget cars. In addition to other manufacturers, Yokohama introduced new innovative developments in at an affordable price : specially extracted oils on a natural basis at the tire warehouse gave them the power to change their structure indefinitely weather minds
• . Tires under the Geolandar brand literally feel the road surface, changing the hardness of the rubber according to the minds of operation: in an aggressive, soft middle they become soft, reducing the effect of aquaplaning and increasing which has a heat extraction coefficient, and at high temperatures will lose the ability to add solids, saving exchange rate resistance
• at high speed.
• Pirelli is an Italian winemaker with an outstanding reputation. Pirelli tires in the world.
• The main advantage over competitors is the increased mileage, which is achieved using a special technology for the production of cord threads: integrated synthetic fibers with natural and composite materials, such tires can save high the power of the human authorities is under the current period of exploitation.

Continental is the most well-known and largest brand with a long history.

The trust of car tires is available at a reasonable price and capacity: the budget series of Continental economy class tires have high performance in all parameters.

The engineers of this company pay particular attention to cost-effectiveness - new developments of the baby from the gum warehouse allow you to save up to 0.4% burning per 100 km run, equal to similar copies criticism of competitors.

We have noticed how many people have liked, and sometimes even looked at, your Toyota Corolla, because the wheels you have chosen give it such an original and unique look.

Well, it was found that the practicality and uniqueness of the car’s new appearance were properly emphasized.

If you don’t want to go too far, and even if you worry too much about the details, follow all the recommendations for tuning the wheels, and then you won’t end up with a lot of problems while driving.

Vibir kuzanki

The manual for the Toyota Corolla states what kind of misfortune it may cause.

It is clearly stated that in cars produced from 1999 to 2001, this parameter is still 4x100 mm, and now it has become 5x100 mm.

In fact, this means that the diameter of the stake, on which the openings for the bolts (studs) are opened, is more than 100 mm, and the number of bolts is used, and for later models – 5 bolts.

The looseness is indicated by the PCD and is calculated immediately: using a caliper, measure the position between the seam openings under the studs (bolts) and the result is multiplied by a factor of 1.701 - the obvious looseness is eliminated forgings.

This parameter is required in order to carry out the drilling of a custom shoe, which has a smaller curl and a larger diameter, and a thicker gum is placed on it.

Custom wheels and loose Toyota

By choosing wide and large-diameter trucks for the car, they themselves increase the ground clearance, but the profile becomes smaller, the suspension system is more important and is not as responsive to road irregularities. The body sags, the arches rub against the tires, and the wheels wear out faster. However, if the rubber profile is larger and the diameter of the disc is smaller, the stability and hardness of the car is reduced, especially when cornering and at high speed.

1. So, to choose custom forgings for Toyota Corolla, you need to take care of all the ingredients, and entrust the work in Sverdlovsk to highly qualified specialists.
2. For
3. choosing the right one
4. To roller, you need to know not only the Toyota Corolla bolt pattern, but also parameters such as:

The rim width is 75% of the tire width and is the required value.

Vilt or wine - stand between the fastenings of the skating rink and the symmetry of the rim.

The central opening of the disk is responsible for compromising the seating area of ​​the machine.

The rim size may vary in inches.

Visnovovovka to ask one lichen - not a warto dumb -sided by Robiti Vibir Non -standard Kolis, Zim Vyzhah Ruin, Pidvisk I Robita, the car is non -unreasonable, the advent of himself that is the same Automobili for infringement.