How to reupholster a car seat.

Doglyad

Golovna
If you need to re-tighten the car seat, it is not necessary to remove it to a specialized salon; the seat can be repaired with your own hands.
In this way, you can give the interior a new look, give it an original style and clean up worn-out seats.
For this type of work, it is necessary to wash the sewing light and sew enough terpene and basil.
The work of changing the casing cannot be called foldable, but at the same time it will take a lot of work.
Materials and tools:
- Perforated eco-cover (vikorized in beige color) 2.5 m
- Ekoshkira without perforation (vikoristovaya beige color) 1.5 m
- Piece skin (vikorized in black color) 3.5 m
Note: after choosing a special skin for your car, it is protected against temperature changes and is also resistant to heat.
The furniture screen will not go through those that do not adapt to the minds of the car, but only to the minds of the apartment.
- Thin foam rubber, thickness 0.5 cm (for gluing skin parts)

- Furniture glue
- Sewing machine

- Heads for skin No. 90 or 100
- Threads for sewing skins (originally not suitable, go with the Extra Strong mark or for puffing) three 200-meter spools

- adhesive interlining 3-5 m
- Machine oil

Croc first.
On the inside of the cover there are intestines with knitting needles.

The stink fragments are needed for a new upholstery, they need to be pulled out and then placed to the side.
Rotating the knitting needles was also indicated on the paper diagram.

Krok five.
Preparing the chicken.

After all the preparations, you can rip the cover and cut the seam allowance.
So, the shapes for the new casing appear.

Krok is sixty.
Rozkriy.

The leather part was transferred to the skin frame.
In order not to pick out details in the mirror image, they are applied to the side of the material.

Krok somiy.
Seam allowance.

For all required sides, the author created seam allowances measuring 1 cm. All parts are also numbered.
Krok eighth.
Virizka.
All prepared parts of the cover are checked again and then verified.

Krok eighth.
Set of details.

In this manner, the author selected a new set of parts for the covers.
In the photo, you can see the rear seat; the back and front seats are shaped in the same way.

Krok ninth.
Paper pins can help in working with a sewing machine.

The author has identified the details for perfect sewing, and their advantage is that they do not leave traces on the materials.
Krok is about twenty.

External look.

After using the sewing machine, cut the foam rubber.

The reupholstery of the interior skin is done by independent tuning specialists and studios.
Koshtuє tse zavichay chimalo i not kozhen vlasnik car you can afford.
We know how to upholster a car interior with your own hands, and you yourself can create any design you have in mind.

What is needed to reupholster seats?

Material (hide, hide, fabric, etc.)

Lining for material

Sewing machine, knives, stationery.

Before you start, you need to know a few nuances so that your work is not simply wasted after a couple of months.

1. What material needs to be reviewed If you are going to replace the skin or replace the skin, then it will be strictly automotive, not furniture.

There’s a lot that doesn’t work with this saving method (shards of furniture skins are 2 times cheaper), but in the end it quickly rubs, frays, and bursts. This means that the furniture skin is less suited to temperature changes, moisture resistance, and sleep changes.

What Brands are trying to achieve is always a matter of priority, depending on the budget they see.

2. What kind of threads are used?

The most beautiful elastic threads are specially designed for leather and leather.

During operation, wear occurs not only on technical parts, but also on the vehicle interior.

Most often, car owners have to deal with repairing seat upholstery or replacing covers. Let's figure out how to rehabilitate a seat with your own hands and save not just pennies, but an hour.

What are your seats and skins like?

, take a look at our material on professional matters and our other materials.

When there is a need for car seat repairs

The situations and reasons why it is necessary to restore seats in a car can vary from physical wear and tear to serious damage to the structure as a result of accidents (accidents).

It is important to remember that the use of transport means from sealed seats threatens with unsafe consequences.

The upholstery or compression of the seat creates maximum insecurity and discomfort for both passengers and the driver himself.
In addition, the outdated upholstery of car seats does not look aesthetically pleasing.
With the help of current utility materials, it’s easy to reconstruct the cover and turn it into a great look.
Types of defects in car seats
The most widespread problems with car seats are:
washing armrests, upholstery and pillows;

failure of gaskets and the basic structure of the car seat;

cleaning of special springs;

changing the color of the skin and causing cracking due to temperature changes or ultraviolet exposure;

mechanical problems not related to the operation of the device - weeding, tearing, breakage of foundations or cuts due to careless handling or the influx of external factors. deformation of the seat structure due to the application of the automobile safety system in the wake of an accident.

Choose a method for solving problems in the car seats to fix problems with the type and character of the damage.

Upholstery for car seats can be made from leather, fabric, screen protector or Alcantara.

The rest is made of short-pile material, almost like natural suede.

It is necessary to work with Alcantara very carefully, straightening the hairs of the fabric when opening.

To replace hide coverings with a nasty alternative to a natural surface, you can use piece or synthetic hide.
It is best to spot defects in velor upholstery or screen protectors using special warehouses that are available at any auto equipment store.
To coat the material you need the following tools:
set of hand heads;
awl;
kreida or a piece of dry white milk;
thick seam threads;
glue;
hammers;
keys and nuts with washers;
colder brewing;
towing belt;
pliers;

hacksaw;

twists;

machine cleaner. Also, don’t forget about foam rubber for padding car seats.
You can find out everything on the Internet, looking at your beloved Ali. Pokrov's instructions for self-repair of car seats
Dismantling and disassembling seats into parts. The work is placed on the table, indicating the skin removal element and fragment of the structure.
If the pillow is worn out, it is also to blame for it being separated and marked for handiness in the subsequent sewing of the upholstery. The case is removed from the pressed metal clamps directly onto the back of the chair.
Roofing the seams of the seat trim. For quick and manual cutting of threads, stretch the working piece slightly and make a cut along the line and row.
If problematic areas are evident, you can spray with gasoline to slightly soften the surface. Complete disassembly of the seat frame

, upholstery, backrests and pillow designs.

Preparation before installing new elements of the chair.

If you re-tighten car seats, you may need to use foam upholstery material. This is an important nuance without any awkward repair of car seat upholstery.
The base material for the pillow is the fabric base of the synthetic lining of the same material, equal
5mm.
Minor abrasions, rips or rips are best repaired with small pieces of upholstery. Golovne, so that the brightness and color are in complete harmony with the main surface. The material is sewn along the edges of the parts, carefully matching the marks.
Refinement or destruction of the contours of the sketch seals not only the material, but the entire result of the sculpted work.
Glue the foam rubber to the upholstery fabric.

better than spray glue

and before connecting the elements of the case.

In this case, it is important to glue the foam rubber with the back side, and in the case of the Alcantara, cover the material with a pile in one direction.
The turn-up seam turns are hemmed and smoothed.
For this purpose, a hammer is used, which will help to easily knock out scars, and sewing heads with threads for fastening the gates.
To complete the restoration of car seats, you will first need to steam the re-tightened parts and dry them using a technical hair dryer and a hot stream of air.
Follow this procedure carefully so as not to burn the surface.
Repair of a frail car seat mechanism

An elegant mechanism with a folding technical device that allows you to change the position of the backrest of car seats.

Detecting a design malfunction is a labor-intensive process and is carried out in the following sequence:

removing the facing pad, the base of the cushion and the fastening bolts;

dismantling the back of the car seat;

cutting the upper edges of the hinges;- this is foam rubber on a fabric basis.

In some cases, it can be replaced with cotton wool. The upholstery is attached to the base or frame of the seat structure and is upholstered with leather, suede or another type of upholstery.

Self-repair of the lining is carried out according to the same principle, as is the restoration of the front case.

Increase your respect!

First of all, it is necessary to first carry out a test on the internal or external part of the casing in order to improve the possible reaction of the materials to the influx of speech.

This is especially true when repairs involve the use of polish from resin or aerosol sprays.

To achieve greater compactness of the upholstery with the lining and a better fit of the cover on the frame, carefully clean all elements of the seat structure to remove old materials and their excess, degrease and dry the material lyuvanih surface.

Repair of a worn out chair.

Video:

Transverse support for a car seat

The transverse support allows the driver or passenger to properly trim the posture, evenly distributing the body's air and making it more comfortable in a sitting position.

Pleas from water and damage to leather and other materials are not always suitable for upholstering seats.

In some situations, it is enough to pour some water into the interior of your world in order to get the idea to remember everything.

Some people would say that it’s a waste of money and, perhaps, they’re throwing a walkie-talkie.

Let's go crazy with statistics.

Therefore, with the remaining research, a person will spend almost two years in his entire life at the age of work and work.

In some apartments people live less, they drive less in cars, so it is no longer necessary to be aware of the upholstery of the car seats?

Before that, it’s not necessary to surround your car seats with a reupholstery.

If you want to completely change the interior appearance of the car, you will need to reupholster the entire interior.

The fabric of forgery in skillful hands can become a masterpiece of mysticism.

Everyone has something that can be created with one’s own hands.

If you complain about those who cannot find the material for upholstering car seats or the entire interior with their own hands, just go to the nearest automobile market.

There will be a great selection of different materials for different flavors and prices.

Select material

tools,
knives,
foam rubber,
powder,
fabric or skin,
spray glue.

This is a universal kit that allows you to reupholster car seats.

Golovny, don’t rush and do everything step by step.

Reasonable planning is the key to successful completion.

Re-upholstery process
The best way to reupholster the car seats is to break it down into stages.
It is necessary to achieve the maximum effect with minimal expenditure of both strength and time.
The repair process may include the following stages:
Wiring of electrical wiring.
Dismantling old covers.
For this purpose you need to remove the seat from the car.
Cause the stench to be attached to a few bolts.
It’s not important to turn them on.

It is important to allow space for further work.

Cleaning the surface of car seats under the brush.

Parts made of plastic and metal need to be defatted.

Folding shapes of new covers.

Rip open the old cover.

Spread the fabric or skin over the underside and place it on a new part of the old cover.

The process of re-upholstering the chair is similar to re-upholstering the seats; at the end the hair dryer is twisted in order to tighten the screen protector.

It is recommended to warm it up before installation.

This ensures elasticity and grip during tightening.

The best results are in seat reupholstery with updated armrests.

The stench is starting to disappear.

Why are uniforms scrambling over old covers?

The supply of fabric and skin is also lost along the edges.

In order to secure the new cover, glue is applied.

This will help glue the edges of the armrest and firmly secure the fabric.

To ensure reliability, dry the gluing area with a hairdryer.

Please!

To give the interior a better look under the parts, you can put foam rubber.

In principle, some kind of insulating material will do.

I often focus on repairing an accident.

The light itself can destroy the integrity of the seat frames, and the salon will lose its shine.

Preparation

The first step is to start making changes, then get the necessary tools and, most importantly, take care of the material.

There are a lot of things to be found in the material: the price for a new one, etc. It’s also not the same: you can use leather, vinyl or textile fabrics.

Although the essence of the repair is the same - a repeated covering of the place with a specially selected warehouse, and then heat treatment.

For the cob, it is good to choose a color scheme that is suitable for use.

This is due not only to the relish of the ruler, but also to the integrity of the picture.

Everything may look harmonious.

We start, obviously, with dismantling the old seats.

If the seats are covered with leather, they will need to be removed.
glue;
It is important to work at home, where it will be easier to sew fragments of leather or alcantara onto the upholstery materials.
It is recommended to label the leather part of the standard cover, indicating the name of the material from which the edge itself is prepared.
You can use a basic marker to apply marks.

We remove the standard cover from the car seat.

We would like to remind you that the chairs need to be easily removed so that the work can be done manually.

Here's how to remove an old cover: press out the metal clips that are pulled out from the back on the back of the chairs.

The cover will always be taken up by the mountain.

Fine leather or Alcantara is pressed with weights until it becomes a new material.

Take a gel pen and trace the edges of the material.

To tighten the clips, mark them with short notches along the perimeter.

You should know that Alcantara, like leather, can be easily cut with scissors.

Alcantara is a material more similar to suede, less like leather, with a short pile.

This pile has several directions in one direction.

It is very important to be careful when opening, because if the pile is not all the same, it can get messy and look bad.

The next stage of the work is the reinforcement of leather or Alcantara foam.

Tse obov'yazkova umova competent constriction.

Repairing a car seat with your own hands is not easy, but the robot has a lot of nuances, which you should know.

And foam rubber is one of the most important materials.

Now we sew the gates and for this we sew a special row.

You should know that there is no need to trim the loose edges behind the thread of the row, because there will be no mark under the foam rubber.

We continue to repair leather car seats.

We have a very new cover, which we can turn inside out and straighten out.

Now you need the cover itself.

It seems that it’s simple, but it’s not so. Once everything has worked out, you need to start from the back.

First we stretch the straps, and then we pull the cover up to the back of the chair.

At this stage of work you can transform the original seat in the sports car.

For this, we need to build up the sides of the seat using polyurethane and give it the required shape.