Hyundai Solaris: Control lamps and indicators.

Golovna Many of us have encountered such a problem as the increased indication of the engine icon (Check engine...), which appears in the car. We present to you the 5 broadest reasons why

fret panel The check engine light comes on. The engine indication appears, as a rule, without delay.

Reason

Check appears

Engine cannot be immediately understood. If there is an auto diagnostic system in the car (for example, in cars like this), which scans all vehicle systems for checks and displays a decryption on the information panel for their presence, the reasons for the appearance of the check engine light will not be decrypted. For most people, the appearance of the warning sign on the control panel means the need to immediately go to the auto repair shop to diagnose and determine the cause, as the “Check Engine” sign appears before the warning sign appears. However, in most cases, when the Check indicator appears, you can, in some cases, determine the cause yourself without going to a car service center, which will save your money. 1. Replace the oxygen sensor (lambda probe) The oil sensor in your car is part of the transportation system exhaust gases

, which controls how much acid is not burned in the combustion chamber of the engine. This sensor helps control the burning of the vehicle. Malfunction sour sensor

(lambda probe) means that the car computer is receiving incorrect data, which can significantly increase the engine's heat and speed. If you do not replace a faulty car sensor, it can cause your car's catalyst to go out of tune (may become loose), which will result in expensive repairs. The performance of new catalysts is even high due to the expensive alloys they contain. On some cars there are a handful of catalysts, the cost of which can reach up to 90,000 rubles. So there is no problem with replacing the sensor.

If you want to replace the sensor, the cost of the exhaust gas neutralizer system is not very small, but it is not affected by the performance of the exhaust gas neutralizer system.

You can also save yourself the trouble of replacing it by doing it yourself. Rich people who use cars have reporting instructions

How can you replace the sensor yourself? If you know where the oxygen sensor is located, then you will not have any difficulty in removing the faulty “lambda probe” and replacing it with a new one.

(lambda probe) means that the car computer is receiving incorrect data, which can significantly increase the engine's heat and speed. Remember that you cannot get away with replacing this important element! 2. Turn over the cap of the fuel tank neck

There are a lot of waters in most of the episodes, when the “check engine” indicator appears, think about

The automobile catalyst helps the car produce exhaust gases from the engine that are environmentally friendly.

It converts carbon oxide and other wasteful substances in the night. If your exhaust gas catalytic converter has become unusable, you will mark it not only when the engine icon (check) appears, but also long before the vehicle's load drops by 2 times. For example, when you press on the gas pedal, the car, as before, does not achieve good acceleration dynamics. How can you get your car catalyst out of trouble?

(lambda probe) means that the car computer is receiving incorrect data, which can significantly increase the engine's heat and speed. If you regularly service your car in accordance with the maintenance regulations automobile company

, then the catalyst is not to blame for going wrong.

The main reason for the failure of the catalyst is the sudden replacement of a faulty oxygen sensor, and the lack of regular replacement of the spark plug, as appropriate.

If the sensor is faulty or the spark plugs are burning, then the carbon oxide in the catalyst is mixed with unneeded chemical elements, which causes the catalyst to overheat, which can then go wrong. Most sensor damage occurs through incorrect installation of the air filter during its scheduled replacement. Also, if you don’t change it regularly air filter , which is what the regulations mean technical service

(lambda probe) means that the car computer is receiving incorrect data, which can significantly increase the engine's heat and speed. car, manufacturer's recommendations, the air mass sensor may go wrong. Theoretically, you can drive for a long time without a broken air mass sensor (for several months). If you remember, the more you drive, the more you will waste your fuel. Replacing a sensor in a car service center is not that expensive, since the robot itself does not take a lot of time and is easy to complete.

The main costs are related to the type of sensor, which can cost 11,000-14,000 rubles on any car model for an original sensor, or up to 6,000 rubles for an analog replacement.

Self-replacement The sensor is very simple. However, due to the low performance of the robot from replacing the sensor, you can trust this robot to a master at a car service center.

Remember that it is necessary to regularly change the air filter in accordance with the vehicle maintenance regulations! 5. Replacing the spark plug and high-voltage wires Sparkling candles in a car with head parts for use burning sum

(lambda probe) means that the car computer is receiving incorrect data, which can significantly increase the engine's heat and speed.. If the spark plugs are faulty, there will be an incorrect supply of spark to ignite the gasoline tank. Faulty spark plugs often have a lack of spark or an incorrect spark supply interval, which leads to improper engine operation. candle key Unscrew the spark plugs from the engine. It is also important to stay close to high-voltage wires, as over time the stench may become unpleasant and leak into the electrical system, which transfers heat to the spark plugs, which changes the strength of the spark.

date: 03/20/2018

The check engine light comes on - reasons

The main reason for the indicator to light up is that the engine is damaged, which indicates that serious problems have been detected with the engine control unit.

• A crash in this situation is possible, since the engine check light has come on and the indicator does not shine, the behavior of the car itself has become unchanged, as the engine pressure and its reaction to pressure on gas pedal, as well as other warning indicators that indicate the presence any kind of problems, “mumchat”.
• Varto will also give great respect to the cold countryside and oil;
• Its strength does not need to change abruptly.
• Ale navіt in whose case the varto is the most likely to get access to a car service center.
• Rot when the indicator lights up - the engine stop is blocked in several situations:
• The car changed its behavior on the road;

The tension of the engine has changed, you can feel its vibration;

You smelled something burning;

The “engine service” light operates intermittently (bright);

The beginning of overheating can be signaled by an indicator that indicates the high temperature of the water in the expansion tank, and the displacement of the inlet, which displays the temperature of the core, or the advanced value.

• Yakshcho Vkazyvnik was not a muddy zone, the mean, the rod -rod -shaped tank is a common reserve of RiDini, but the familiarization of the “notorious overheating” did not you, the temperature, the regime is possible, the vicentan of the prostitute
• Change the vehicle speed;
• Do not use the air conditioner;

Turn on the heater to reduce the engine temperature.

As soon as the oven was turned on, the hot air did not start, and it started to hum. These are the first signs of “unsafe overheating”. The above-described methods for detecting “unsafe overheating” include others: detection of steam coming out from under the car hood, reduced engine pressure, empty expansion tank, burning ї systems, if people begin to enter the salon outside (cold) outside.

It often happens that on the panel of accessories in the interior of a car equipped with electronic devices, the emergency sensor light goes off.

Once the car has started, it continues to drive, but the engine check has blown, which means that the engine is in emergency mode. Actual models current cars

(Audi, BMW, Mercedes-Benz, Porshe, VW) equipped with a system designed to perform self-diagnosis, the decrypted information is displayed on the information panel. However, drivers will never realize why the engine malfunction check has been flared. To start the engine, turn on the heater.

• If the engine check light is flashing, there is no need to call out, as it will soon go out.
• There is a signal that when the engine is running, inform about the damage in your robot.
• If there is a malfunction in the power unit, an error is recorded in the memory of the control unit in the form of the encoded signal.

Your department also has the responsibility to notify you about problems not related to power unit.

In order to determine the location and nature of the breakdown, the specialist will need professional knowledge, evidence, special devices and tools. Important: The electronic unit of the ECU sends a command to flash the alarm, subsequently detecting faults of different degrees of complexity. In addition, there are problems, both serious and minor.

As a diagnostic method, it is recommended to reduce operation

transport department . Acknowledged car dealers often independently determine the reason for including the check, without considering the visit to the service station.

1. Signs of major malfunctions and causes appearing on the indicator signal
2. When the car breaks down, it catches fire
3. Check Engine

• After refueling at a gas station, the most obvious reason is the unacceptable acidity of the filled gasoline.
• When you watch out for the following symptoms:

Decreased tension.

Interruptions in the robot engine (deafening).

Detonation as a result of the intense fire of burning. add a portion of burning wine to the tank; remove gasoline that has been accidentally spilled, clean out the fuel system.

1. If the check does not go out after the reason has been set, it is necessary to delete the error recorded in the device’s memory using a special computer program.
2. Checking the level of Oliya and I will become
3. Significant reasons for signal failure include engine overheating and a decrease in the level of oil in the internal combustion engine.
4. It is recommended to check the engine temperature.

In case of overheating, it is necessary to check the equipment and the oil. After checking the level, it is necessary to top up the insufficient quantity mastilny material

.

Using a clean paper server, the fluid and storage of engine oil are checked according to the following criteria:

Color

• Consistency.
• The presence of mechanical elements is included.

The tripartite effect occurs when more than three combustion chambers are used to replace all four.

The engine starts to triple due to the pressure of the burning mixture into one cylinder. Damaged and contaminated spark plugs will also cause the alarm to turn on. Check Engine

.

To avoid thinking too much about getting the engine check, you just need to clean or completely replace the old spark plugs with a new set.

Checking the ignition coil involves checking the support on the terminals and testing to ensure that a spark is created in the black color.

What to do if the check engine light comes on due to a fault in the fuel supply system In case of damage caused by the insertion of the burner into the cylinders, it is recommended to check the injector assembly and clean it. Their openings must be cleaned, rinsed, if necessary, and replaced with a new device.

1. Lowering the vice into
2. burning system
3. Wikiped by faults:

Gasoline pump (in carburetor and injection engines).

Heat filter

Injection pump pumps (for diesel engines).

• If the check is illuminated by the output of the catalytic converter, water is simply drained from the system to the exhaust, and then the exhaust sensor (sour) is turned on.
• Yak throw off the check for the engine In the event of critical defects in the engine, the information is recorded in the ECU memory and is not automatically sent back after the defect has been corrected. Whose check continues to light.
• In order to delete a recorded message with your own hands, according to auto vlash operators, you can perform the following operations:
• warm up the engine to operating temperatures;
• disconnect the terminal on
• rechargeable battery

for every hour (from 5 to 15 pm);

renew the connection with the glue;

insert and turn the ignition key before starting (at which point all the indicators on the switches light up); weed one quill; turn the key at the gate.

When turning the ignition key to the oN position, the functionality of all control lamps is checked (do not start the engine). If a lamp does not light up, it requires inspection by an authorized dealer.

HYUNDAI company After starting the engine, check that all warning lights have gone out. Any of them will continue to burn, which indicates an unfortunate situation that will require respect.

When unlocked parking galma It is the fault of the parking warning lamp going out.

Control lamp low level The fire will burn for a long time, because the supply of fire is insufficient.

ECO (ECO indicator, for obvious reasons) (

Automatic box

gears)
EKO-indicator is a system that allows transport to be processed in an economical mode.
The indicator is displayed when the fuel has been used economically, which allows you to advance the fuel economy. The ECO-indicator (green) burns out, since in the eCo oN mode the heat is spent effectively.
The ECO indicator can be displayed by pressing the TrIP button.
The enhancement and use of the ECO mode is described on the front page.

Burning economy

to lie in the style of water and road minds.

This function does not work in those minds that do not meet the criteria for economical driving, such as P (park), N (neutral) or reverse.

As soon as the display shows the burning flow rate, the eCo indicator blinks.

BE CAREFUL

Do not watch the indicator when it fails.

This may result in damage to the vehicle and may cause an accident that may result in serious bodily injury.

Airbag system warning lamp (for obvious reasons)

This indicator light goes off for approximately 6 seconds immediately after turning the switch to the oN position.

1. Be careful, stay close to the edge of the roadway and support the car.
2. When the engine is running, turn the oil level.

If the amount of oil is too low, add oil until it is sufficient.

If this warning light remains on after adding oil to the engine, or if there is no oil, contact an authorized HYUNDAI dealer.

UVAGA

If this warning light remains on after adding oil to the engine, or if there is no oil, contact an authorized HYUNDAI dealer.

If you do not tighten the engine carefully after turning on the control lamp for insufficient engine pressure, the engine may be seriously damaged.

If the engine oil warning light comes on while the engine is running, the engine may be seriously damaged.

This lamp lights up when the pressure on the oil system drops below normal.

In a normal situation, it lights up when the ignition is turned on and then goes out after the engine starts. When the engine is running, the light indicating low oil pressure comes on, indicating a serious malfunction. In such a situation, the car will be stuck, as only those who are confident in the ability to tune the engine and check the olive oil.

If the oil level in the engine is too low, add oil to the specified level and start the engine again.

If the lamp continues to burn while the engine is running, it is important to stop it.

If you are in a situation where the engine pressure light comes on while the engine is running, before you start the engine again, you must go to an authorized HYUNDAI dealer to have your vehicle checked.

Parking warning lamp

insufficient equal Galmivna Radina This lamp lights up when the parking light is turned on, and the key to the ignition lock is in the START or ON position.
This lamp is liable to get stuck when the parking brake is unlocked while the engine is running.
Warning about the insufficient rhubarb of the galmic garden
The light of the control lamp indicates an insufficient level of liquid in the hydration system tank.

This car has a double trim system, mounted behind a diagonal pattern.

This means that the same highways will run on each side, and there will be linings on both wheels of the car at work. In such a situation, the vehicle's backbone will require more speed. Halm pedals

And more zusillya have new.

In addition, the performance of a car that only uses part of the trim system will be greater than normal.

Burning economy

When you see the galms and the car is starting to roll, switch to a lower gear to galvanize the engine and park the car as soon as it is safe for you to do so.

To check the operation of the parking brake warning light and the parking brake level being insufficient, check to see if it lights up when you turn the parking switch to the oN position.

It is not safe to drive a car while the warning light is on.

If the halogen system warning light remains on, be sure to contact an authorized HYUNDAI dealer to have the halogen system checked and repaired.

Anti-lock brake system (ABS) warning lamp (for obvious reasons)

This lamp goes off when the key is turned to the oN position and goes out after about 3 seconds, if the system is normal.

When unlocked If this lamp continues to burn after the ignition is turned on, it lights up when the ignition is turned on, or does not ignite after the ignition is turned on, which indicates a possible malfunction of the ABS system. In such a situation, it is necessary to immediately contact an authorized HYUNDAI dealer to have the vehicle checked.

The car's brake system will continue to function without the support of the anti-lock system. electronic system subdivision of galmic zusil (eBD)

When two warning lamps burn out at the same time, the car is faulty AbS system, that ebd system.

Burning economy

In this case, the AbS system is the main one

halm system

If the ABS or EBD warning light comes on and goes off, this indicates a malfunction in the speedometer or odometer/road odometer.

In such a situation, it is necessary to immediately contact an authorized HYUNDAI dealer to have the vehicle inspected. Electronic stabilization system indicator exchange rate stability

(ESP) (for obviousness)

This indicator goes off when the key is turned to the ON position and must go out after approximately 3 seconds.

When the eSP system is turned on, it controls the vehicle's performance.

As usual, the system indicator does not light up.

When driving on a slippery road, the road surface or the connection between the tires and the road changes, the eSP system begins to work.

At which point the indicator begins to flash, informing the operation of the system.

If there is a malfunction of the eSP system, the indicator lights up but does not go off.

In such a situation, it is necessary to contact an authorized HYUNDAI dealer to have the vehicle inspected. ESP indicator (for obvious reasons)

This indicator goes off when the key is turned to the ON position and must go out after approximately 3 seconds.

To turn on the eSP system, press the corresponding button.

In such a situation, it is necessary to contact an authorized HYUNDAI dealer to have the vehicle inspected. The indicator will light up, indicating that the system is disabled. If this lamp lights up when the eSP system is turned off, the system may have a malfunction.

Turning indicators

Flickering green arrows on the control panel display the direction that shows the turn indicators.

As if such an arrow burns, but does not shine;

it blinks more often than usual or does not go away at all, which indicates a malfunction of the turn indicator system.

To confirm this information, please contact an authorized dealer. Increasing indicator distant light

This indicator lights up when the headlights are turned down or when the headlights are turned down briefly by turning the indicators.

Indicator of increased size fires

: Indicates that it is necessary to shift to 3rd gear (2nd gear is engaged at this time).
: Indicates that you should shift to 3rd gear (at this time 4th gear is engaged).

halm system

If the system is not operating properly, the up/down arrow indicator and gear number will not be displayed.
When selecting the eco-oFF mode on the route computer, the manual transmission switch indicator is not displayed.

Battery charging indicator lamp

This warning lamp indicates that there is a malfunction in either the generator or the battery charging system.

How will it catch fire when the car crashes:

1. Move the car to the nearest safe place.
2. When the engine is running low, reverse the belt tension on the generator drive and cause it to rupture.
3. If the belt tension is normal, there is a problem with the battery charging system.

It is best to contact an authorized HYUNDAI dealer to resolve the problem.

The low level indicator light is on This lamp indicates those who burning tank

The car may be empty.

In such a situation, it is necessary to refuel the car as soon as possible.

Continuing the failure of the lamp, which is ahead of the low level of fuel in the tank, or if the arrow of the fuel level indicator is below the “E” sign, it can lead to skipping of the engine cylinders and damage to the catalytic converter.

Indicator lamp for insufficient water level in the water tank (if obvious)

The light of the control lamp indicates that the washer reservoir is practically empty.

It is best to fill the tank.

If this warning light remains on after adding oil to the engine, or if there is no oil, contact an authorized HYUNDAI dealer.

If you have a warning light that is on, malfunctions in the emission control system can lead to damage to the elements of this system, which is indicated by driving characteristics cars and/or on fire.

If this warning light remains on after adding oil to the engine, or if there is no oil, contact an authorized HYUNDAI dealer.

If the emission control system malfunction indicator illuminates, the catalytic converter may be damaged, which may cause the engine to lose power.

Please have your engine overhaul system checked as soon as possible by an authorized HYUNDAI dealer.

Engine coolant temperature indicator lamp (if obvious)

The warning light comes on when the engine coolant core temperature exceeds 125±2.5°C (257±4.5°f).

It is unacceptable to continue driving with an overheated engine.

halm system

If the transport engine has overheated, div. “If the engine overheats” in section 6.

When the engine coolant temperature indicator light comes on, this indicates overheating, which can damage the engine.

Warning lamp for trunk lid/luggage compartment door

This warning light goes off if the trunk/tailgate lid is not closed properly, even if the key is in the lock.

Indicator lamp for signaling that the door is not locked

This indicator lamp lights up if the doors are not closed securely, even if the key is in the lock.

Door open indicator (for obvious reasons)

The indicator shows what kind of doors they are.

Immobilizer operation indicator (subject to availability)

This lamp goes out when the key from the immobilizer transmission system is inserted into the firing switch and turned to the ON position to start the engine.

At this point you can start the engine.

After starting, the lamp goes out.

If this lamp glows while the key is in the ON position before starting the engine, you must go to an authorized HYUNDAI dealer to have the system checked.

With an electronic key system
If 2 seconds after turning the ignition key to the oN position, the control lamp goes out, which can indicate a system malfunction.

You will need: all the tools necessary to remove the rear trim of the left side sill and the trunk trim, as well as a 10mm socket socket.
1. Remove the front and rear facings of the left...

Removing the pressure in the life cycle system of gasoline engines
Remember that gasoline is an extremely fire-safe place! When working with life system components, ensure all necessary fire safety procedures. Don't burn!

Don't get close to the city... Rozpodilny shaft. Spindle shaft axles

1. Receive the entire command and control (clause 2.8). 2. Remove the drive shaft pulleys (clause 2.6.14-2.6.16). 3. Win

split shaft

from the cylinder head to the flywheel.

Val resolutely... Car : Hyundai Solaris.

Asks

: Smirnov Kirilo.

The essence of nutrition 301 : How can I send a “CHECK”? 304 I'm flying!

I have a Hyundai Solaris, and it’s constantly blowing the “check”!

This clearing is complete, simply by replacing the non-working candle with a new one, after which the clearing will appear on its own.

Independently discarding a receipt for Hyundai Solaris

You can send alarms yourself to the Hyundai Solaris using the OBD-II protocol and the presence of a special adapter with a diagnostic device, be it a smartphone or a computer, that supports Bluetooth wireless communication technology.

In order to carry out a check of the car's stamps, the following actions can be taken:

Diagnostics process and troubleshooting without OBD-II

On the Hyundai Solaris, it is possible to diagnose and detect various faults without having to deal with the usual additional devices.

Diagnostics (this method does not work)

The method, described below, is circulating all over the Internet.

We verified it on our editorial machine.

Vіn does not work.

• The method is not visible, so that the leaders of the rulers may think that he is working.
• Produced on video:
• Vidalennya pardons

In order to see the error, it is necessary to complete the entire guesswork process from points 1 to 5, and without turning off the ignition, press the “gas” again.

After the liquid is wet and hot, the engine is started.