Damn the robot engine failed.

Doglyad

Golovna For the sake of fairness, it is impossible to call the XRAY a failed car for VAZ. It is planned that 16 thousand cars will be sold in this region.

Ale, having laid your hand on your heart, this is not the circulation, which is how you write.

Serial XRAY has developed breastfeeding lately. At the same time, there was criticism that the appearance of the machine was not consistent with the previously built prototype. Where is the lightness and intensity of the image?

There is no її.

However, on the donor aphid in the Renault specimen

I was embarrassed by the smoothness of the move.

Lada easily absorbs all road friction and responds to irregularities with a larger caliber. However, there are no complaints about the energy capacity of the suspension - there are no breakdowns on the right. And the axis of the battle is felt, then the axis is on the kerm.

You will walk five hills on broken asphalt, it will be painful. And well, the reward for this shaking was vivirena cerova - even not.

When cornering, the XRAY is uncomplicated, it is reluctant to take turns and does not indulge in an informative turnaround. Then the position with the asphalt XRAY moves completely vertically - the unfavorable geometrical permeability (minimal) helps ground clearance- 195 mm!) That's a problem with engine thrust at low speeds.

Before the speech, the system fell on the schili. The test car is from the first batch - which means that it is not possible to turn on ESP - some of these functions have not been restored. Since this fall, the residents of Togliatti have introduced a number of additions to the design of the Xray, including adding an ESP deactivation button.

Such a prompt response to customer needs can never be tolerated. Classic. Airat recently purchased a new XRay with a 1.6 engine (106 hp).

Immediately at the car dealership, the manager started working on chip tuning.

The result is that there are no delays at the start and re-mixing of gears, the acceleration becomes noticeably smoother from low revs due to the increased air conditioner.

The dealer's warranty is fully preserved, and the control keys of the factory firmware are copied.

On the same day, Airat wrote a video about chip tuning:

"06/12/2018 having decided to reflash your XRAY 1.6 106. Thanks to the guys, everything was done professionally, well done. The car has become different, the jerking when releasing the gas has appeared, the gear shifting is much smoother. I don’t watch out for the ivks, in the crackdown The tension will not be lost. We will continue to be careful. Thank you again, Ayrat."

Unfortunately, such problems (correction of the engine after an unclear chip tuning) occur quite often.

B and Z class cars, as well as small crossovers, suffer the most. The most important thing is that unclear tuning on some models can cause the engine to fail. Friends, before you start tuning or servicing your car, it is important to take note of the software (or parts) and the different parts (both in terms of software, parts and materials) iv), what is the reputation and evidence of this or that specialist (organizations) in this area. Viconali chip tuning Lada Xray

with engine 1.6 106 hp

h manual transmission transmission

The master of the car has given us the following tasks - to eliminate jerks and pauses when pressing or releasing the gas pedal, to add traction at low speeds, to eliminate the loss of traction when the air conditioner is on, to preserve the dealer warranty.All the shortcomings of the serial firmware are connected with individual changes in engine tension through strict environmental standards and clear chip tuning allows them to be installed without reducing the engine resource.

Fragments of Xray equipment on the B0 platform (Sandero), then various parts for diagnostics are in the glove compartment.

For best results, the tuning firmware includes proprietary calibration from Athletic Motors, based on tuning from the Paulus retailer with full savings from the dealer guarantee and a copy of the factory control keys program

The main features of the Athletic Motors firmware in the basic tuning version are that the thrust from low speeds is even greater, the gas pedal moves more smoothly, and there is no detonation in any engine operating mode. At the hour of the first test run, Vlasnik Khrey was immediately pleased with the result! In other words, the car now accelerates already at 1500-2000 rpm, the engine reacts immediately to pressure on the gas pedal, there are jerks when releasing the gas and shifting gears.

IN

summer period

Turning on the air conditioner will not cause loss of wind and loss of traction, and with a relaxed driving style, power consumption will be reduced by 5-10%. The increase in tension and torque is +10%! Now the engine develops 115-120 hp.

(keep under the fire) and about 160 nm torque to turn.

A similar operation is carried out with a 1.8122 hp engine. On cars with AMT, we were able to make the robot work smoothly and smoothly, without noticeable jerks during acceleration or galvanization. We worked on the tuning firmware for the Lada Xray with a 1.8 engine (21179) and a manual gearbox.
The owner of the car wants to put in the jerks and pauses when pressing and releasing the gas pedal, to speed up the acceleration of the car.
As for the 1.6 (106) engine, Ildar received a special professional

security software

upgrade the basic calibration of the tuning firmware from the Paulus retailer.

“So, after the firmware update, the car became noticeably faster.

Without stopping, I began to press on the gas pedal.

The dips disappeared when the gears were switched at high speed, and at idle the engine simply started to purr.

Nothing has been cleared about the Vitrata yet, the weather is not good...”

The “X”-shaped series of vintage cars continues to delight their fans with new products.

The remaining child of this series was the Lada X Ray, which from the very first appeared and became the subject of many disputes.

The remains of the car are the result of Renault Sandero’s well-kept twin brother, and critics have begun to compare him with his great-grandfather.

  • At the end of the day, the points were as follows: the car significantly outperforms the Sandero both in terms of maneuverability and controllability.
  • In addition, its originality was refined by designers, who gave a distinct note of authenticity to German design.
  • Many auto enthusiasts are pleased to note that there is a clear similarity with the Cayenne.

However, in the process of corruption there were also signs of dysfunction in the order of the temples, which were voiced during the day.

Its systematization and particularity will allow potential rulers to understand what aspects of the war to emphasize respect.

Engine Lada X Ray

Speaking about engines, it’s easy to guess that the engineers again started shouting about the choice.

So, the car can be equipped with the following engines:

VAZ-21129 with frame 16;

Oil seal leakage (crankshaft, camshaft)

All engines in the series have a decent oil appetite.

To avoid this problem, an immutable rule for skin care will be:

Transmissiya Lada X Ray

For all the obvious problems of the transmission (which, before speaking, Lada engineers were concerned with other parts of the car), can be attributed, at least to the robot.

The main problem is identified by the lucky leaders of traditional mechanics.

Already often the noise of the muttering of the barks of the Vlasniks is heightened, as the panics are launched into service.

This problem can also be solved, but to a lesser extent.

There is no such thing as such, since the investigation has established that in case of deliberately loud noises in the robot, the mechanism operates according to the “protocol”.

For those who want to reduce noise, there is only one step - change the oil in the gearbox.

With the correct new oil, the mechanism operates at maximum productivity and minimal distortion, which means reduced operating noise.

If you want to choose the X Ray with the most “quiet” box, in order to concentrate your attention on the work

  • The time frame of skin care cannot be separated by 100 thousand km.
  • Practice has shown that its potential can exceed the “norm” by 2, or even 3 times (with careful observation).

Khodova part Lada X Ray Hodivka is not the trump card of X Ray. The engineers included everything that was possible with Sandero, “seasoning” the arsenal of capabilities with increased ground clearance.

First of all, it is necessary to note that in front it is represented by the well-known McPherson, and in the back by its sister brother.

A similar decision has several advantages, and itself:

significantly reduces the cost of repairs; creates the possibility of availability of spare parts. Roughly speaking, the suspension is structured in such a way that it would not be a problem to drive on rough roads

Huchness

What is that?

The march continues mercilessly, with fading blows hitting our roads.

Of course, the sounds of “fighting” with the road are a little in the cabin (perhaps the designers believed that this, of a kind, is a part of the boasters - say, listen, how the car works great). This feature is not easy to rejoice - the driver will have to use sound insulation, which transmits the throat to the cabin, with further installation of everything back. Body and interior of Lada X Ray

hit me up, please "

slimy horse » buv nadіyno thefts of covers In terms of productivity, the bosses mean inconvenient tasks (their replacement is expensive activities, since it is necessary to take care of other factors).

Before that, their cover loses its outer shine over time. Lada X Ray mechanica - this is how you can call one version of the updated Lada Xray crossover. On the right in that car updates Now you can boast of a new 1.8-liter engine with a power output of 122 hp.

and manual gearbox.

In addition, you can now turn on ESP on the Lada Xray.

We tried everything on a test drive. I want to get to know you again crossover Lada

Xray doesn't matter.

In one river, it sold out in the country with a circulation of more than 20,000 pieces.

Not worrying about restyling, VAZivtsi began to paint their cars. The brake jet nozzles on all cars were replaced; the tires could leak. The expansion tanks have been replaced, which cools down.

Assigned to the version with the AMT robot, which is transferable head bet 3.9, on the Lada X Rey the mechanics are 4.3.

There is a strong urge to pay attention to a good car. However, at high speeds here, after 100 km/year in fifth gear, the engine turns over 3000 and burns more. We checked it and it was painted with sound insulation.

front arches Lada X Rey mechanics.

We drove along a frozen, broken road, and here it was gravel and sand.

To be honest, the sound of the suspension is easily noticeable, no matter what. The sound of the engine, almost like a rock, knocking on the front arches, was not noticeable. I’ll guess right away, when the Lada appears

Xray noise insulation

cover the rear arches.

But after the numerous noises of buyers, they added noise and moved forward.

Water tools That's one aspect. Now you can officially install large 17-inch wheels on the Lada X Rey Mechanica.

So, re-typing a car with toothy studded tires is not difficult. We had a car with Velcro, which, of course, works harder in the snow and ice. Ale navіt without any preparation Lada X Ray z

manual transmission

got stuck.

Supply of pouches


Receptions and improvements covered all variants of the model. And you don’t need to pay for them.
Well, the heavy-duty version with a 1.8-liter engine and a mechanical mechanism costs RUB 685,900. The door is bad, as it is not the most prominent proposition in the class. Having shown a test drive of the Lada X Rey, the mechanics are not good at rowing in the snow, but the new engine is good for driving on the highway. External joint of the drive
Remove the drive and turn the hinge over. If necessary, replace the hinge or drive assembly

Nestacha mastila at the hingeLook at the cover.


Nestacha mastila at the hingeRemove the drive and turn the hinge over. Place at the hinge

nove ointment If there is sufficient quantity, replace the damaged joint cover. If there is any play, replace the hinge or drive assembly
Heavily worn middle bearing Remove the intermediate support bracket and check the play at the bearing.
If necessary, replace the middle bearing Lada Xray. Vibrations at acceleration and intensification Malfunctions
rechargeable battery The battery is discharged. The starter is not checked.
part shaft The engine is checked thoroughly, the lamps burn dimly
Cause of malfunction Usunennya method
The car has not been in use for three hours Charge the battery for help or on another car
Belt tension is loose Tighten the generator belt.


Nestacha mastila at the hingeWhen the engine is running, it produces a lot of electrical energy (the head of the sound system)


Change the number of devices that use the battery
Heavily worn middle bearing Remove the intermediate support bracket and check the play at the bearing.
Deterioration of the insulation of electric lancets, a leak on the surface of the battery Turn over the flow current (no more than 11 mA when connected), clean the surface of the battery.
Be careful, acid! Faulty generator
Div. diagnostics 64-4 Diagnostics Kalina
generator malfunctions Solder the pins, replace the generator rotor and assemble the generator
Broken or short-circuited in the stator winding, short-circuited to the ground (if the generator is short-circuited) Check the winding with an ohmmeter.

Nestacha mastila at the hingeReplace the stator or generator at assembly



The vehicle's onboard voltage is greater than 15.1

Lada Xray.
Heavily worn middle bearing Remove the intermediate support bracket and check the play at the bearing.
Generator noise Generator noise The generator bearings are damaged (temple, wind). The noise disappears when the darts are connected to the generator and becomes noticeable when the drive belt is removed
Replace the rear bearing, front bearing
with cover or generator at assembly 64-4 Diagnostics Kalina

Short circuit in the stator winding.


The noise is noticeable if you connect the darts to the generator
Heavily worn middle bearing Remove the intermediate support bracket and check the play at the bearing.
Replace the stator or generator at assembly Short circuit in one of the diodes. The noise is noticeable if you connect the darts to the generator Lada Xray.
The battery charge indicator does not go off The battery low charge indicator does not go off when the heating is turned on
Peregoriv zabozhnik F1 mounting block

Nestacha mastila at the hingeoutside the car


Explain and find out the reason for the burnout.
Heavily worn middle bearing Remove the intermediate support bracket and check the play at the bearing.
Replace the prisoner Obriv u lantsyugu "vimikach zaplyuvannya - a combination of adjustments"
Turn over the darts from the mixture to the mounting block and from the mounting block to the combination of accessories Contacts and vimikacha do not freeze
Check with a contact tester. 64-4 Diagnostics Kalina
Replace the contact part or remove it from assembly The battery low charge indicator does not burn out when the ignition is on and does not burn when the engine is running. The on-board voltage of the vehicle is below 14.4 Volts
The battery low charge indicator does not burn out when the ignition is on and does not burn when the engine is running. The on-board voltage of the vehicle is below 14.4 V Worn or stuck brushes, oxidation of contact rings

Nestacha mastila at the hingeReplace the brush cleaner with brushes, wipe the rings with clean gel polish soaked in gasoline


Damaged voltage regulator Replace the voltage regulator Faulty rectifier block
The connection between the brush and the brush was destroyed. Renew the connection with the results of the brush cleaning service
Soldering of the main windings of the alarm winding from the contact rings Test the caravan system with the engine (at the service center).
Replace faulty elements The adjustment of the cable for gear selection is broken, the position sensor for gear selection is faulty, or the electric lances are faulty Adjust the drive (at service center


), if necessary, replace the faulty cable.

Invert the sensor (at the service center), replace the faulty sensor