Gazove ownership of a VAZ 2109

Which generation of LPG is suitable for the VAZ 2109 car. Everything depends on the type of engine installed on the car: carburetor or injection.

The first or other generation of LPG can be safely installed on carburetor models, whereas on injection models a similar installation can end in failure.

For an injector, a GPZ of 3-5 generations is more suitable.

In the first generation of gas equipment, gas dosing is adjusted manually. The pressure behind the gearbox is always supported by the diaphragms. It is not possible to repair the first generation on injectors, because the engine may start to reverse, and the manifold will not be adjusted to that extent. Anyone who can reassure themselves that this is the name of the flapper is unlikely to help the engine. The biggest minus of the system is absolutely not great, whether parameters such as the support of the wind flow with a clogged air filter, loss of elasticity of the diaphragms, changes in atmospheric pressure, how sensitive it is to HBO manual adjustment.

Adding his low virtuosity and high reliability.

However, once you have already signed up and signed up for installation, do not proceed immediately.

If possible, quilt the masters.

The idea is that it’s all the same, but you can tell them to work in a way that’s best for you and your car.

The work takes a little more than 2-3 years. Then the bottle is filled with water so that the master can check the tightness of the bottle and make the necessary adjustments. For a cob, season 10 liters. On the right is that in small quantities the gas can run out, but the engine runs unsteadily, and it is not easy to refuel. After completing all the work, you can go on the road, vikorist and stop the gas.

There is no need to immediately press the gas pedal in the background, since the new equipment needs to be broken in first.

Drivers are responsible for adopting a different method of operating the vehicle and complying with the new safety rules.

Wp_related_title (color: #2a526b;).

It’s important to remember this very important moment, since the installation is already in full swing.

Before the technical inspection is completed, it is necessary to submit documents to certify that the installation is safe.

Since it was established independently, it is clear that there are no such documents on hand and it is likely that the driver himself will have access to it.

(1 It's good not to get into trouble. 5.00 Having purchased a water-based HBO, having paid quite a few pennies, having chosen the best suppliers, it is also important to carefully read the license of the installation manufacturer itself.

And I’m also glad that I want to follow this in the world, as a master to work on his work, it’s not connected so much with the victoriousness as with the reliability of the installed HBO for the water itself.

It is not possible to repair the first generation on injectors, because the engine may start to reverse, and the manifold will not be adjusted to that extent.

Anyone who can reassure themselves that this is the name of the “firecracker” will hardly help the engine.

The biggest drawback is that the system is not very good, whether parameters such as the support of the wind flow when the air filter is clogged, loss of elasticity of the diaphragms, changes in atmospheric pressure, how sensitive the HBO may be, manual adjustment.

Adding his low virtuosity and high reliability.