Do-it-yourself expedition trunk for UAZ Patriot with more standard dimensions saved.

Traffic rules The trunk of a car carries a great deal of weight.

The main tasks that we follow are:
Creates a place for transporting additional speeches and accessories.

Provides a basis for installing additional lightening devices and protects against damage.

Speaking about advantages, it is impossible to take into account the shortcomings of this design:
The aerodynamics of the car are significantly affected, leading to the loss of fuel.

In some cases, when rough grinding is allowed, the sound insulation and hardening are affected.

Trunk

What is the trunk made of? To make a luggage base with your own hands, you will need material for its preparation. For the best decisions

the camp metal, the vaga is insignificant, ale mіtsna.
For the design, the best option would be:
Aluminum.

Stainless steel.

Profile tube.

Many car owners know that aluminum is a suitable material for making a trunk frame with your own hands.

The wine is lightweight, resistant to atmospheric agents and theft from Iran.

Vikorist aluminum can be used to create a variety of designs.

Mold and flexible sheets of steel - what else is needed to create a clear structure?

A little attention is paid to the fact that the mass of aluminum and the profile tube significantly shifts.

Profile pipe
A profile tube with thin walls is most often used to look like “cotton-type” luggage rack material.
After selecting the required material for the design, we move on to the stage of making and unrolling with our own hands.
Here the size, dimensions, necessary elements for the future design and approximate quality are indicated.

Carrying out measurements for the trunk of a car

Initially, the width and length of the car are measured.

Then we can quickly start serially or earn our own position as a lawyer:

The basis of the design.

Frame.

Strengtheners for the structure (jumpers).
Board.
Possession for vimiru.
Knives.
Zvaryuvalne obladnannya.
Guma.
Cardboard.
Glue warehouse.
Farba.

Trunk for UAZ Hunter

Another method of preparation:

We are ready to fix the “Hunter” with our own hands, using the “grinder” to carefully prepare the blanks for bridging from the steel coil.
We create a template for the stands from cardboard to install the structure.
First apply the cutting template to the metal sheet, then mark along the edge.
We install a cross member at the welding point.
It is possible to adjust it on the stove to increase the stability of the trunk.
Using additional cardboard, we create a new template that reflects the shape of the original trunk openings.

The design is applied to the surface for curing. It is important to open the end fastenings of the trunk to the supporting risers of the Hunter. We drill and drill before the designated place on the structure and the vikorist chair for the animal. We install the fastening bolts. Vikorist sandpaper for cleaning seams and other metal parts.

Clean and let it dry for an hour after skimming. To prepare the structure, you can spray it like a simple metal mixture, or spray it with a spray can to speed up the process of preparation, as well as the drying time itself. The UAZ Patriot was created specifically as a car designed to improve off-road use and to carry your boss to the road surface.

About this you can see all the technical warehouse: local salon, two
burning tank
, high suspension and reliability of the transmission units, which has gone beyond the legendary predecessors.
The trunk volume for a standard seat position is up to 1150 liters.

The trunk volume for a standard seat position is up to 1150 liters.

This is the simplest method of fastening. However, when you are at ease, the place clears up more often. With such placement, transportation

great objects

in the back everything becomes problematic.

Expedition trunk.

Mainly used by off-road enthusiasts.
The reason is simple installation, excellent design, and the ability to fasten various large objects.
This kind of trunk fits on any car and has special roof rails.
Most often it is transported by:
spare wheel;
shovel;

sand trucks;

canisters with burning liquid;

plan, sleeping bags;

other possession.

The place of the wood well protects the body from the gilts, preventing the appearance of chips.
Also, most drivers install additional optics on the front part.

Such a trunk can be divided independently.

For this you need a welding apparatus and metal tubes of the required size.

In this case, the form can be varied, depending on specific needs.

The head, when the trunk is opened, must be remembered not to exceed 30-40 kilograms, otherwise the center of gravity of the car will be displaced uphill and when turning at high speed, it can be transferred to the overthrow.

Solutions are also ready, presented by the following companies:

"Expedition"; Eurodetal; The stench is practically identical in appearance, the price starts at 12 thousand rubles. The fastening of such a trunk is located at the drain, thus making the roof rails loose. Trunk

This is the most extensive option for mandrivniks.

Є a plastic box that is attached to the cross rails.

Call for help in these situations if it is necessary to protect your speech from atmospheric fallout.

What's more on the road? That's right, the necessary words on the road are at hand. If the food stops, where should I take them?

On basic cars, the trunk has been rebuilt for this purpose.

What about the UAZ Hunter? I wish it was all wrong here. Behind

rear seats

There will be a great opportunity where you can grab everything you need.
Ale most often vykoristovat for the creation of an additional place.
Even when driving a UAZ Hunter, be sure to be driven by the company, and your place in the salon is 100% guaranteed.

Where can you get the necessary “drinkers”?

In other cars, this is what the trunk on the car is used for. What is it, and what can you earn from your plan on the UAZ Hunter? You need to get back up.

It's important to have a trunk

This is the simplest food.

The interior of the car will sparkle people's memories.
Mostly, from the “aft” part there is a “cabinet” with a folding table, a mini-bar and more.
A

UAZ Hunter, no matter how you say it, is a car for watering, fishing and distant roads.

And here it is necessary to transfer a lot, and sitting in the salon with your feet resting on the rolled tent, fishing pot, buckets, and other necessary speeches to the mandrevnik doesn’t even feel like it.

Do you want to pull a reason behind you? Well, it’s easy to work like that. But most of it goes to the old, overturned trunk itself.

Disadvantages: I’ll add something like this

Please use the original version.

Two arcs gradually unfold as the car moves forward.

Whenever there is a need to attach transverse beams to them, the ceiling is installed.

It is secured with a special spring cable or a cord.

Respect!
The crossbars are secured using clamps inserted into them.

The later beams are cut square and bolted tightly to the UAZ Hunter.
Transverse racks on the roads

This, in principle, is a good option for everyone. This way, there are important options for other types of cars, such as utility vehicles.
The strength of these units is that they are removed from the outside at the time when they are no longer needed.

In addition, they are much lighter for other options, due to their design.

On the downside, first of all, it is necessary to take into account the great bulkiness of these trunks for cars.
Download them from 2 materials:

aluminum,

thin steel rods.

The retin varies from 7 to 12 mm.
The luggage racks themselves for the UAZ Hunter can be made with your own hands, and they are also easy to install.
The shape of this part resembles a flat box with walls that are made up of thin elements.
Prepare the trunk yourself

So, the ruler decided to show himself a competent mandrivnik and prepare a place for transporting items on his own.

Miraculous.

Why do you need to print?

Select the type of detail based on the most important features.

It was necessary to thoroughly sand it with an emery paper (after completely drying it after boiling) and prepare it.

For special connoisseurs, as an option, you can chrome the surface of the viroba.

You can install it on the walls and get it in place.

Preparing the late trunk Everything here, on the one hand, is simpler. The tools themselves, just like the material, are taken from a square profile of metal, from which two “arcs” emerge to secure them on the UAZ Hunter.

The openings are drilled to secure the neatly flattened ends of these “arcs”, which open similar ones.

After this, after the “designer” fabrication, the arcs are tightly fixed in place.

After this, a frame is prepared that will be attached to these arcs.

Here on the right are the fantasies of the ruler of the car.

There are no special boundaries here. The simplest and most popular option is a set of aluminum slats with fastening devices. When folded, they can be separated from each other. The advantage is that stench is easily and compactly stored. You can do it right in the UAZ Hunter showroom. Well, that's an option

, you can prepare a special bag using the principle of a transverse trunk.

Head, so that the fastening points are aligned.

The structure is formed from transverse parts with a width of 20 cm and is capable of holding a load of up to 150 kg.

The top of the board is made from a round pipe, and it is carried along the bottom.

The front part has a mount for additional optical elements. Surface preparation is usually carried out using a powder method with an anti-corrosion agent. Yak vibrati There are a lot of different options that you can find suitable option

for any car. To reduce noise in the wind flow, an additional spoiler made of plastic is installed in front. You can add a trunk to the UAZ "Patriot" from companies that manufacture them, from stores and on Internet platforms, as well as

official dealers

Regardless of the wide choice of models that meet different needs, individual production is optimally suited to the needs of different needs. When it is necessary to gain respect for the manufacturer, he must rely on positive recommendations, and the strength of the prepared design contributes to the safety of the hour. We first need to determine and select the dimensions of the element. Since the trunk on UAZ cars is prepared individually, a schematic little picture of the desired result is first put together and, if necessary, processed at once from the faqs. Ready option

All you need to do is select the accompanying fastening elements in the store.

Installed

Before installation, the vehicle must be carefully monitored. The structure is fixed, as a rule, for a very long time, and the product will lead to damage on the body. salon.

On the sides of the axles it is possible to install additional devices for lightening, the stench will appear brown not only in winter, but also when the camp is cleaned, and also during the time of trimming the folding crossbars. You can either attach the hijack to the sides using special slats. It is also possible to secure the spare wheel.

rear doors

Most often they are mounted together in order to simplify the construction.

So it will be easy to climb onto the expedition trunk for capture.

Warto points out the need to adhere to the following rules: important items are placed evenly and securely fastened, the fragments of the car, when the top is attached, changes the center of gravity.

Apparently, special care is required in the face of collapse.

Self-prepared

For the cob, you need to choose a material, which can be profiled pipes, aluminum profiles, elements made of metal or stainless steel, which can be welded around the perimeter. Welding cannot ensure sufficient reliability, so the trunk on a UAZ can become deformed and displaced. Therefore, it is necessary to supplement the base with bridge stands, spread across the skin 15-20 cm.

To form the sides, you can simply use profiled pipes or steel sheets.

In order to build a trunk on a UAZ, you will have to spend a lot on materials that need to be purchased.

And learning to work with metalworking tools and welding doesn’t take too many hours.

In this case, the availability of such a frame in a store many times exceeds the cost of preparation. An expedition trunk is an indispensable attribute of a UAZ car for short trips. It is mounted on rails or gutters and is ideally suited for transporting large items that cannot be accommodated in the cabin or take up too much space.

It’s not uncommon to carry cans of gasoline, supplies, baggage, vodka, etc.

In addition, the device protects the juices from the stems when passed through teapots.

May be accepted and protected

frontal slope : With this method, special cables are stretched to the front part of the car from the forwarder. There are a number of types of trunks for UAZ, which have different meanings and their design features.

You can either get them or earn them with your own hands.

What you need to know about devices and how to choose them

The expedition trunk is a heavy-duty “cat” that is made of light metals and is attached to the undercarriage of vehicles, minibuses or vans.

The dimensions of the expedition vehicle are similar to the dimensions of the UAZ and the area of the vehicle.

Luggage racks are divided into universal ones, for the singing model and individual ones.

Universally suitable for various vehicles.
Car racks for the same model are produced with a different configuration of the frame, dimensions, fastening of the same modification of the car.
Individual preparations are made for contracts
specific car

, and the car driver can create the required device independently.

Once you select the travel trunk you need, grab a bunch of important moments.

The dimensions of the expedition do not have to exceed the dimensions of the vehicle, otherwise the exterior of the vehicle will suffer.

The fastening may be even better and more reliable.

The design is responsible for the mother bracket housing the spare wheel.

The forwarder is not to blame if he is high, so it will have a negative impact on the aerodynamics of the UAZ.

Such trunks are available either with a mesh or without a mesh (for transporting other items).

A country or gospodar's version (or simply a cross-section) for transporting goods on short distances along a high-grade road.

You can add too many boards, climbing frames, tools, gum, etc. to the trunk of a summer house. The vantage in this case is not due to being too important and large. The dacha option is much easier than the tourist option, which allows you to easily install it or remove it. The sports trunk has the ability to vertically secure one or more bicycles.

The greater and more important the value, the greater the strength of the fastening will be required.

In addition to the trunk of a UAZ, you can add an awning, a mount for a spare wheel and tools, a spotlight, an expedition bag (attached to the side or back), hooks for a cable, a box or a waterproof bag for speeches, additional accessories dimensional lights.

Some of these accessories can be purchased independently.

Pros and cons of luggage racks on UAZ

Advantages of the design at the transport department:
So, there is a greater burden on the weight that can be transported;
allows you to carry speeches that do not fit in the middle of the car;
fixes the sagging hinges of the rear doors in order to move the spare tire on the rear doors;
additional lighters can be installed on the trunk;
Yes, it appears that the leaves are stolen during the process of drying with wood;

The car is becoming more and more gloomy in appearance - as befits a posse.

Nedoliky:
It is necessary to increase the sailing capacity of the vehicle (especially with a canopy), when empty - the frontal support;
the car consumes more fire, and more force is applied to the crash;
the center of your machine is displaced, as a result of which durability suffers;
Improper division of the vagina can cause nicking;
unclear fastening reduces sound insulation;

the trunk, which is screwed on with screws, cannot be easily inserted or removed.

Install it more beautifully for a reason, so that it’s about every problem, but for the needs.

The fastenings must be made manually for easy installation. DIY trunk for UAZ The easiest way is to add a ready-made virib.

Prices range from 5 to 50 thousand rubles - depending on the dimensions,

design features

and yakosti.

Prepared immediately before cooking, the workpieces are boiled at once in a straight cutter.

Behind the inner perimeter of the structure, we fasten the rods opposite the longest cuts to the middle of the frame.

To avoid the sags of the prepared platform, it is necessary to add stiffening ribs with even spacing.

The ribs are prepared from a profile gusset.

Reinforcement of the entire structure is carried out using an additional profile pipe from behind prepared square-shaped cores.