It's a shame that the Check Engine light has gone off.

Traffic police Car : Hyundai Solaris.

Asks : Smirnov Kirilo. Substance of nutrition

: How can I send a “CHECK”? I'm flying! I have a Hyundai Solaris, and it’s constantly blowing the “check”!

I've already gone to the station technical service And I figured out what the problem was.

The first time the stench went away, but now it appeared again, and the behavior of the car did not change at all. Please show me how to throw it off on my own, to someone who I don’t want to pay for again in the service. Diagnostics and troubleshooting that a driver may need for a Hyundai Solaris

transport department

In certain situations, if it is not necessary to perform this work in a certified service center.

It’s not easy to earn money for a robot, it’s a shame to know what you can see on your own 301 mercy, what to do with the first level 304 , so that you do not sign up for the riddle about the ECU, so as not to influence the operation of the car and its devices.

Because such features can only be obtained with a special dealer device (scanner - note), one of such repairs includes the repair of car airbags.

When do you see amends on your own?

In the event of serious problems with the Hyundai Solaris, the functions can be repaired on their own after any other repairs have been carried out.

So for example Cody has mercy

What can we say about the spark bypass in one of the cylinders (the remaining spark number is applied directly to the cylinder - approx.).

Apparently, if these gaps are detected, the ECU will send a signal to the visible “CHECK”, which cannot be cleared if the code has not been erased or the terminals behind the battery have been removed.

This clearing is complete, simply by replacing the non-working candle with a new one, after which the clearing will appear on its own.

The method, described below, is circulating all over the Internet.

We verified it on our editorial machine.

Vіn does not work.

The method is not visible, some of the leaders may think that they are working.
Produced on video:
Vidalennya pardons

In order to remove the error, you need to finish the entire guessing process from points 1 to 5, and without stopping the flame, press on the “gas” again.

After the liquid is wet and hot, the engine is started.

If the process is carried out correctly, the pardon must exit. As you could have rolled over yourself, there is nothing special about the model you have seen on the Hyundai Solaris. The check light is on in the video and the Hyundai Solaris is deaf

It often happens that on the panel of accessories in the interior of a car equipped with electronic devices, the emergency sensor light burns out.

Once the car has started, it continues to drive, but the engine check has blown, which means that the engine is in emergency mode. Actual models current cars

(Audi, BMW, Mercedes-Benz, Porshe, VW) equipped with a system designed to perform self-diagnosis, the decrypted errors are located on the information panel. However, drivers will never realize why the engine malfunction check has been flared. To start the engine, turn on the heater.

If the engine check lights up, there is no need to call out fear, because it will go out soon.
There is a signal to burn when the engine is running, to indicate damage to your robot.
If there is a malfunction in the power unit, an error is recorded in the memory of the control unit in the form of the encoded signal.

I'll set the engine check light to come on. Because the car has not been updated with diagnostics automatic mode

Important: The electronic unit of the ECU sends a command to flash the alarm, subsequently detecting faults of different degrees of complexity.

Among them, problems are detected, both serious and minor.

As a method of carrying out diagnostics, it is recommended to suspend the operation of the transport unit. Acknowledged car dealers often independently determine the reason for including the check, without considering the visit to the service station. Signs of major malfunctions and causes appear on the indicator signal

When the car breaks down, it catches fire
Check Engine
After refueling at a gas station, the most obvious reason is the unacceptable acidity of the filled gasoline.

When you watch out for the following symptoms:
Decreased tension.

Interruptions in the robot engine (deafening).

Detonation as a result of the intense fire of burning.

add a portion of burning wine to the tank; remove gasoline that has been accidentally spilled, clean out the fuel system. If the check does not go out after the reason has been cleared, you need to delete the error recorded in the device’s memory using a special computer program. Checking the level of Oliya and I will become Significant reasons for signal failure include engine overheating and a decrease in the level of oil in the internal combustion engine.

It is recommended to check the engine temperature.
In case of overheating, it is necessary to check the equipment and the oil.
After checking the level, it is necessary to top up the insufficient quantity
mastilny material

. Using a clean paper server, the container and warehouse are checked motor oil

according to the following criteria:

Color

Consistency.

The presence of mechanical elements is included.
The smell of garou.

Because of the fluidity and quantity of oil, everything is ready, the engine starts to turn off unimportant sounds, noises during operation, as in mode

Broken and fouled spark plugs will also cause the Check Engine light to turn on.

To avoid thinking too much about getting the engine check, you just need to clean or completely replace the old spark plugs with a new set.

Checking the ignition coil involves checking the support on the terminals and checking to see if a spark is created in the black color.

What to do if the check engine light comes on due to a fault in the fuel supply system

In case of damage caused by the insertion into the cylinders, it is recommended to inspect the nozzle assembly that is being cut.

Their openings must be cleaned, rinsed, and, if necessary, replaced with a new device.
Reduced pressure in the firing system is caused by malfunctions:
Gasoline pump (in carburetor and injection engines).

Heat filter

Injection pump pumps (for diesel engines).

If the check is illuminated by the output of the catalytic converter, water is simply drained from the system to the exhaust, and then the exhaust sensor (sour) is turned on.

Yak throw off the check for the engine
In the event of critical defects in the engine, the information is recorded in the ECU memory and is not automatically sent back after the defect has been corrected. Whose check continues to light. In order to delete a recorded message with your own hands, according to auto vlash operators, you can perform the following operations:
warm up the engine to operating temperatures;
disconnect the terminal on
rechargeable battery
for every hour (from 5 to 15 pm);

renew the connection with the glue;

insert and turn the ignition key before starting (at which point all the indicators on the switches light up);

weed one quill;

turn the key at the gate.

Most often, such actions lead to the desired result; the reset code is known in the memory of the ECU unit.

The main reason for the indicator to light up is engine failure, which indicates serious problems with the engine control unit.

The crash in this situation is possible, since the engine check light has come on and the indicator does not shine, the behavior of the car itself has become unchanged, as the engine pressure and its reaction to pressure on gas pedal, as well as other warning indicators that indicate the presence any kind of problems, “mumchat”.

Varto will also give great respect to the cold-juvenile radish and oil;
Its strength does not need to change abruptly.
Ale navіt in whose case the varto is the most likely to get access to a car service center.
Rot when the indicator lights up - the engine stop is blocked in several situations:
The car changed its behavior on the road;
The tension of the engine has changed, you can feel its vibration;

You smelled something burning;

The “engine service” light operates intermittently (bright);

When the emergency oil level indicator comes on;

The light came on, which indicates that the engine is overheating. Damaging the engine can cause serious damage. And, most importantly, a car dealer may be able to carry out warranty-free repairs.

Why is the Check Engine light on?
In the meantime, if the emergency oil level indicator comes on, be sure to turn off the engine.
Turn on the heater to reduce the engine temperature.

As soon as the oven was turned on, the hot air did not start, and it started to hum.

These are the first signs of “unsafe overheating”. In addition to the above-described methods for detecting “unsafe overheating”, there are a number of others: detection of steam coming out from under the hood of the car, decreased engine pressure, empty expansion tank, fire of the shaft system, if the outside (cold) weather begins to enter the cabin. Yakshcho on fitting panels your car light came on

Check indicator

engine (or just the check light on), you should be at least on your guard. The reasons for this can vary from a loose gas tank cap to serious problems with the engine. What does the Check engine indicator mean?

The name of the Check engine indicator is literally translated as “Check engine”.

However, the engine may not work at all if the lights are on or flashing.

The indicator may indicate problems in the fuel supply system, going out of order

several elements

fire, etc. Sometimes there may be a completely different problem - for example, the gas tank cap is not tightened or the catalytic converter is malfunctioning. However, you cannot ignore the indicator signals every time, as this can result in serious problems. Alternatively, the reason for the indicator to light up may be due to poor burning power.

So don’t be surprised if after refueling at an unknown gas station you get a blinking Check Engine light.

Select the engine speed indicator on the vehicle's control panel under the engine speed indicator.

If the light does not go out after restarting the car, you can only go to the nearest car service center. Spend there comprehensive diagnostics

engine and yoga systems. Operating a vehicle with a check engine light, turn it on until advanced expenditure

burning, unstable engine operation, reduced traction characteristics of the car.

Moreover, in this case, the auto dealer may void the warranty on car repairs.

Why did the light bulb burn out and how to fix it? The main situations in which the indicator lights up and the recommended action for the car owner: If the Check engine lights up and immediately goes out when you start the car, there is no damage to the engine.
The reason for the arrogance, for everything, is innocent - a waste of a krishka
burning tank
or else it is under-twisted.
They are tanned well enough to check that it happened earlier.
If the indicator burns out during the process, then it will stop and check the details.
Perhaps you will find the cable that is under the hood, or you will expose the battery terminal. There is a price for all the accessories - wires, hoses, etc. As if a light bulb is shining in the middle of a crash, then stop and check the sounds that you can hear from the engine, pay attention to the amount of oil, look at the main parts of the engine. If no visually obvious damage is detected, it is recommended to go to the nearest car service center and carry out diagnostics. The engine is working normally, and the Check light is constantly shining, becoming increasingly unheated.
Next, check the candles and the cat, pay attention to the scourge of the fire. In this case, you should call a tow truck and drive at low speed to the nearest car service center.

We have already stated that Check will burn when starting the engine, either using an orange color.

This is normal, as the blink lasts no more than 3-4 seconds and occurs simultaneously with the blinks of other indicators on the device panel.

And if not, then the trace of viconati is recommended more than anything else.

Video: Check sensor lights up

https://www.youtube.com/embed/uqdKfKX4MlE	Table: reasons for the Check engine indicator to light up and the action to be taken	When and in what situations the check is lit
Possible reasons	Proposed actions Under Russia, during dispersal	Sharp ignition, faulty
air filter	Replace the filter, it will run smoother When the indicator blinks, the motor turns The fuel in one of the cylinders does not burn completely, the gasoline either burns out	exhaust pipe
, or it immediately sinks into the catalyst	Replace the spark plugs, check the coil and armor wires, check the timing marks	After refueling
Low acidity burning	Change gas station	When the ignition is on
Normal car reaction	There's nothing to do	After the car, engine, after the board
The Check engine was consumed by water.	Apply WD40, dry, clean contacts	On a cold engine
Faulty knock sensor	Replace	On a cold engine
On a hot engine	Faulty shaft sensor	At high speeds
Missing coils, firing or faulty crankshaft sensor	Replace the coil or sensor At low speeds	On a cold engine
Sensor malfunction	throttle valve	After replacing the spark plug
"Bidna" flaming sumish	Change the octane number of gasoline to suit	After replacing the air filter
It has become more common in the morning, the exhaust exhaust has changed, the lambda probe has reacted	Turn off the engine and start again	After replacing the gas diverter belt
The terminal has jumped out of any sensor, for everything, for a wind hose	Check the terms	After installing the gas cylinder equipment
Fuel injector emulation is incorrectly cut	Nalashtuvati	After setting the alarm
The turbo timer has only one life line connected, on the other there is a temperature sensor, heat pedals and a mass air flow sensor	Reset Check engine, connect offending lines	After replacing the combustion filter
The filter is installed with a slight squeeze	Replace filter	With one-hour increased consumption of the bedroom Long ride, warming up the sour or unclearly scorching Fuel up
with yak fire	car date you prefer	On difficult climbs
After replacing the firing module	Module connection problems	Remove and reconnect the positive terminal from the battery
At sub-zero temperatures	Malfunction of the throttle position sensor or its chip.	Replace the device or install a chip in the place
When pressing the accelerator pedal	Clogged filter	Clean or replace the filter

Reset or reset the Check indicator

In most cases, as the table shows, Check goes off when any sensor goes out of order or changes in the operation of the car.

However, after diagnostics and elimination of the malfunction, the light bulb continues to burn.

On the right, the “trace” of the meal is lost in the computer’s memory.

For this option, you can “discard” or “reset” the indicator display.

You can do this on your own by completing a number of awkward operations:

The sensor is reset, and the Check light no longer lights up. If nothing happened, go to the service center. The illumination of the Check engine indicator on the control panel almost always damages the car's parts.

The following recommendations from the statistics will practically help you avoid the problem of a folding engine that is expensive to repair.

Good luck on the roads!

Many of us have encountered such a problem as the increased indication of the engine icon (Check engine...), which appears in the car. We present to you the 5 most common reasons why the check engine light comes on on the control panel. The engine indication appears, as a rule, without delay. Reason(lambda probe) means that the car computer is receiving incorrect data, which can significantly increase the engine's heat and speed. Most cars have 2 to 4 sensors. What do you have at home?

car scanner If you connect it to the car, you can easily find out which sensor needs to be replaced.

What are the reasons for a faulty sensor in a car: Over time, the sensor is coated with a ball of treated engine oil (oil soot), which changes the accuracy of the sensor readings for regulating the gasoline mixture and the optimal distribution. The malfunction of the sensor causes acidity in the car not only to, but also to the CO2 moved in place of the leaky vents in the exhaust. What you need to earn: If you do not replace a faulty car sensor, it can cause your car's catalyst to go out of tune (may become loose), which will result in expensive repairs.

The performance of new catalysts is even high due to the expensive alloys they contain.

On some cars there are a handful of catalysts, the cost of which can reach up to 90,000 rubles. Also, don’t worry about replacing the sensor. If you want to replace the sensor, the cost of the exhaust gas neutralizer system is not very small, but it is not affected by the performance of the exhaust gas neutralizer system. You can also save yourself the trouble of replacing it by doing it yourself. Rich people who use cars have

reporting instructions How can you replace the sensor yourself?

What are the reasons for a faulty sensor in a car: If, when the “Check” indicator appears, your car is still running smoothly and does not have the usual sound signs of a bad engine (engine knocking, humming, creaking, etc.), then first check the seal of the gas tank. It is possible that your gas tank cap has cracks or is not tightened enough.

If the cap is not tightened enough, then after tightening it all the way, continue driving the car for about an hour to see how the engine is working.

To prevent the engine check from appearing for this reason, regularly check the cap of the filler tank neck.

Remember that the cover needs to be replaced with a new one from time to time! 3. Catalyst for vehicle exhaust gases The automobile catalyst helps the car produce exhaust gases from the engine that are environmentally friendly. It converts carbon oxide and other wasteful substances in the night.

What are the reasons for a faulty sensor in a car: If your exhaust gas catalytic converter has become unusable, you will mark it not only when the engine icon (check) appears, but also long before the vehicle's load drops by 2 times. For example, when you press on the gas pedal, the car, as before, does not achieve good acceleration dynamics.

4. Replace the air mass sensor

The mass flow sensor regulates how much gasoline needs to be added to the mix for optimal combustion.

The sensor continuously informs the car's computer about the amount of acid that is supplied. A faulty mass loss sensor will result in increased loss of fuel, an increase in CO2 level in the exhaust gas, and also a decrease in engine power and smoothness.

What are the reasons for a faulty sensor in a car: Also, if the sensor is faulty, the dynamics of acceleration will be affected. In cold weather, a car with a faulty sensor will have trouble starting. What are the reasons for the air mass sensor to go wrong: Most sensor damage occurs through incorrect installation of the air filter during its scheduled replacement.

Also, if you do not regularly change the air filter, as required by the vehicle maintenance regulations, manufacturer recommendations, the mass air filter sensor may go out of order.

Theoretically, you can drive for a long time without a broken air mass sensor (for several months). If you remember, the more you drive, the more you will waste fuel. Replacing a sensor in a car service center is not that expensive, since the robot itself does not take a lot of time and is quite simple.

The main costs are related to the type of sensor, for some car models it can cost 11,000-14,000 rubles for an original sensor and up to 6,000 rubles for an analog replacement. Self-replacement The sensor is very simple..

What are the reasons for a faulty sensor in a car: In new cars, spark plugs last more than 150,000 km. However, the period for scheduled replacement of the spark plug can be reduced due to various factors related to the type of fire and the style of water. If your spark plugs have not been changed for a long time, or if you notice failures in the engine due to combustion, it is necessary to urgently replace them with new ones. Don't be fooled by emergency replacement The candle is burned out, since it is not very expensive to burn the candle, so it is also necessary to replace them.