Chery tiggo mtu 20 won't start. Chi does not start Chery Tiggo. Reasons for not starting a car

Greetings on your food, we are getting ready for publication, the next hour will be publications.

Balakovo, LADA (VAZ) 2108

Vidpovіdalnіst for svoєchasne vіdpovіdaє persh for all crankshaft position sensor. You can check yoga on a car with an oscilloscope or for showing engine revolutions with a scanner. It's easier to try to replace. Ale with a respectful look at the wiring and the rose and the correct installation.

sensor checked good

* Vіdpovіd tsogo koristuvach not є ekspertnym

Good afternoon. If it is an option to deliver a \\ m to the service and perform diagnostics, then it is better to do it yourself and read the code of pardons. So, guess, could it be that you overdid this inaccuracy? Have you refueled at a new gas station, or have you been waiting for a repair?

the varto computer does not show a pardon.

Good afternoon. Reverse the timing marks, they may have been beaten up, with a pardon drive, you may not be until the engine starts.

until which trip

You have a collection of an inlet of an inlet, an abstract of the reasons for the reasons for Kilka, Zbiy in Elektronitzi I shocked, if one is a valve in the result, it was packed for the Karennya bavovna. at the same moment the valve is open and bavovna). In the first type, the diagnosis is checked in the other one. Perhaps the reason is in something else, it is necessary to start from the most basic.

Good evening! The timing marks can also be checked with a scanner, but if your case, if the engine does not start, you happen to remove the casing, the best way to check them. It is possible that the belt tension rollers were set incorrectly by jumping.

Rostov-on-Don, Kia Ceed

Hello, as my colleagues remembered, as if shooting in the collector, it is necessary to reconsider the system of pickling and borrowing. If the timing marks are installed correctly, then it is necessary to recheck the installation of the camshafts. Shooting at the intake manifold, it means early ignition is installed. The fact that the on-board computer does not show a pardon does not mean that the professional has no way to show it. The sensor sours as it reacts to damage to the molding and occupancy of the hot sum. To be alerted or code of malfunctions in the system. To that raj, we will carry out diagnostics with a professional scanner.
If there is an early ignition, then it is possible for a spark to appear at the hour, but for the fire to rise and the valves to open at the wrong time. It is also necessary to re-verify the camshaft position sensor, which measures the moment and the torsion of the injection, and also synchronizes with the readings of the crankshaft position sensor for the camshaft position.
Freeze the vice in the scorching system, try to remember the scorching coils and reverse the appearance of a spark on the scorched candles.

Hello, in an even better way, rechecking Dvopromenev with an oscilloscope or a motor tester, a crankshaft and camshaft sensor. You don’t need to analyze anything, just connect the probes to the sensors and on the upper oscillogram you will see how the sensors are working, and they are one to one, you will talk about the accuracy of the installation of the timing marks. A fully equipped motor tester has a lot of sensors in its arsenal, so as to do a good job of diagnosing the priming system. With a pressure sensor connected to the intake manifold, they can show in which valve station and how the stench works, on the oscillogram you can look at the debris on the valves. You need to know the service and still have it, well, and of course people can read oscillograms.

Chinese automobiles turn a mass purchase for the price of their cheapness, but a low variance is fraught with partial breakdowns. To finish the shvidko, characteristic signs appear, which indicate the malfunction of the rukhovo system. Ale first, lower down for a tool and proceed to the analysis of your car, it is necessary to determine exactly what the problem is.

Chi do not start dvigun

The situation, in which the car does not start, calls out a reverent gasp for any water, even if there is a clear breakdown, it will cost you a fortune. But often if the starter is functioning properly, then the cause may be a broken robotic gearbox installed on the Tiggo. Therefore, before that, how to bring the car to the car service, you can perform a few operations to check the correctness of the other nodes and units:

battery. With an insufficient equal charge, the starter simply cannot see the spark, which is necessary for the primary ignition of the fire;
Transmission. In order to change the setting, you need to turn the ignition lock to the “Enabled” position, connect the diagnostic tool and select the “Start Permissions Engine” item in the “Parameters” menu. Then you need to turn the lock to “Start”, and if you see “Starting permissions”, then the problem should be solved in another place;
If the breakdown was not far off at any stage, you can check the special code about the malfunction. In such a case, it is necessary to enter a code, which type the system has in the case on display in the broken nodes.

Most of the problems are caused by damaged solenoid valve operation, which includes different pairs or unpaired transmissions. You can also check the wiring harness between the TCU and the valve and check the integrity of the contacts. It is also possible that the oil pump relay is faulty, in such a case it is also necessary to reverse the wiring or replace the attachments when everything goes wrong.

This gear does not shift when the engine is running

This problem is rather unsafe, shards can appear without an hour of disruption, which can turn in water and provoke a serious accident. Such an incompatibility is the result of a malfunction of the solenoid valves, which ensure the transition to high or low gears. This phenomenon is accompanied by such problems:

additional transition of the box to the “Automatic” mode;
the ability to turn on the reverse gear;
automatic switching to the first gear when the halma pedal is pressed. The appearance is accompanied by a sound signal.

As a rule, such phenomena are observed as a result of the failure of the harmony of the main components of electronics - controllers, wires, and others. But sometimes the causes of problems are more trivial. Tse mozhe buti vitik, zabrudnennya or overheated oil. As a result of an untimely replacement, the oil of rumbly parts is erased one on one, and comes into disrepair. If the periodicity of replacing the oiling materials was done, then the cause could be a damage to the oil supply system.

The electric pump in the reference station should be remembered that it works no more than six seconds in one cycle, and the battery can see a voltage at a level of 12.5 V. An intermittent wrapping of the annex and the presence of a working pump may be a sign of insufficient voltage or a faulty food relay. Re-verification of the electric pump is carried out according to the following algorithm:

turn on the gear, watching the hour of the robot and the attachment;
set the indicator to the vise when the pump is turned on (the indicator is due to growth up to 50 bar);
measure the temperature of the morning air - in normal minds, it is not guilty to overexpose 20 C o.

The most likely cause of the breakdown may be the presence of a fault in the galma pedal sensor. To do this, turn on the ignition lock, select the “Brakee Switch” item on the diagnostic device, and press the pedal. As if the attachment shows that it was let out, it means that it was negligently after the manifestation of a mistake. Indeed, sometimes the problem is solved in a simple way.

The engine is deaf when roaring

When the position sensor or the solenoid valve is connected, the car may stop at low speeds with an audible sound signal. Automation can also react in this way to the illumination of a damaged plug in a hydraulic drive. Given the inconsistency, it is only used by the way to analyze the vіdpovіdnogo vuzla i usunennya mіkhura poіtrya. Other reasons for this phenomenon:

oil flow in the drive area, which is necessary for switching on the clutch;
damage to the contact on the wiring position sensor of the circuit;
failure of the drive to turn on the mechanism.

As the damage in the robotic electronics led to a decrease in the capacity of the control at idle, which is manifested by superimposed acceleration or interruptions in the robotic on-board control, the transmission automatically switches to neutral at low speed. Diagnostics is carried out with the aid of a tester connected to the TCU.

If it is necessary to turn to fakhivtsya

The Chery company, apparently, did not compensate for the shortcomings in the quality of its cars, having provided water with a report instruction and electronics, building independently diagnosing more problems. Zavdyaks with a lot of water can self-diagnose, and perform the simplest operations with the presence of the necessary tool.

However, without proper knowledge and knowledge in the building of a car, the driver is more likely to turn to the qualifications of fahivtsiv. Tse mozhe buti spetsializovaniya avtoservis or HUNDRED, yak pratsyuє z usima brands of cars. Maistry can create all the necessary works, select the necessary components and replace the window glass materials according to the recommendation of the picker.

Many modern car enthusiasts know that the Cheri Tiggo is a compact crossover, the release of some kind of new building in 2005. The car is itself, so I call it, a copy of the Toyota RAV 4 model.

Similar elements with this car are: body, interior, suspension schemes. The appearance of the Cherry Tiggo model is in the front crossover design.

Most of the owners of this car at least once, however, ran into the problem of starting the engine. Cars of such models as Chery Tiggo T11 and Chery Tiggo with 2.4 l engine capacity are especially worthy. The article is given as clearly as possible, looking at the possible causes of such problems, as well as their solutions.

Reasons for not starting a car

The main reason is the discharging of the car battery. A similar problem is blamed for the lack of care of motorists before the operation of the battery. The unit needs to be checked regularly in order to fix the problem with the charge and ensure the correct term of the transport service.

Another reason for the failure to launch is the inadequacy of the spark plugs. If the problem is in them, then it is necessary to replace the parts. It is possible to reverse the practicality of candles by twisting and looking at them.

Among the additional reasons are also seen:

Vіdsutnіst kharchuvannya on the gasoline pump. In this situation, it is recommended to recheck the guard and relay;
Rozgermetizatsiya, vyklikana deformations or ushkodzhennymi fastening, wires, hoses;
Vіdmova roboti RDT. A similar problem is zazhady reverification of the vice in the scorching system;
Clogging of the mesh in the fuel pump module. To correct the situation, it is necessary either to add gasoline, or to remember the grid;
Getting into the storm water tank in the winter season, rock, condensed condensate.

Also, the cause may be a breakdown of the injection pump, which is involved in pumping the fuel from one half of the tank to another. You can choose for the help of the DUT arrow. For more vipadkіv avtomobilu need yakіsny repair, for yakim more likely to go to the car service.

What work, how dvigun vіdmoviv in frost

Irrespective of the reasons for reincarnation, one of the most widespread ones is the attempt to start a transport facility in the cold. Most of all, don’t go out the first time, but sometimes movers don’t show a sign of life.

Nasampered, varto calm down, like a similar problem. Panic and help can only worsen the situation and cause an unnecessary breakdown, if you try, fix those that really need it. To that, I don’t want to spend money on stained glass for an additional car repair in the cold, it’s worth picking up, which caused the problem.

In a different way, first, start before starting the engine, in the winter season, the car needs to be cleaned in the snow, and also three doors are removed for the help of a special heating pad.

I would like to warn you that the launch of the engine would be the best, as if all the necessary systems were in order. If there is a lot of oil, then it’s better to vicorate yourself, as I recommend a virobnik. Chery Tiggo has 5W-40 oil.

As soon as the vehicle was re-checked for a clear, cool look and the last tank, the attempt to start the car failed, the wart proceeded to diagnose the remaining elements. In the middle of nowhere, the suspicion falls on the battery.

To reconsider, what is the actual problem in the new one, it is necessary to vikonate the sequence of presentations below:

Date the battery pack.
Start the headlights.
Pokrittya key at the lock zapalyuvannya.

It is recommended not to twist too sharply, to let the fuel pump of the car turn around with its work. It is also recommended that at the time of rechecking the start-up of the power supply, for the operation of such a battery. Now, the rest of the day, try to press the clutch pedal and turn the key again.

If the launch is not successful, you can repeat the test two or three times. If you want to try another, then it is necessary to give the car a little of it. For the whole hour in the salon, absolutely everything fits.

Tsikavo! Otherwise, try the engine and it may not start. Varto continue to turn the starter and step on the gas pedal. If there are problems, the car will start up through a sprat.

On the tenth day of the week, I tried to stop and think about the other cause of the vinyl problem. Another, on which respect is given after the discharge of the battery, are candles. Better for everything, maybe you need to clean them up. Dodatkovo you can ask for a light from a good motorist, whose car is not far away.

One more moment, about a kind of warto memory in the winter season of rock, is the importance of sharpness. Destroy smoothly and with a stretch of 5-10 quills, drive in such a manner that you do not overdrive the engine wraps at 2500 revolutions per quill. As soon as the engine warms up - but it will be remembered - you can start driving in normal mode.

Below is a table of the most common problems and solutions, how you can deal with them.

Cause	usunennya
Vologa in the middle of the module zalyuvannya and on the wires	Zayva kіlkіst rіdini navіt vglyadі condensate zdatne vyklikati a lot of problems. High-voltage wiring is especially important. To that it is recommended to use special oil-sprays, for the help of such weeds, put the water on the wires.
battery discharge	In which case, charge the battery or top up the electrolyte, as it is not about the lead battery.
Loss of engine oil consistency	If it’s about the cold, then in the cold the oil can become thicker, through which it will be necessary to additionally warm up the crankcase of the engine. You can use the help of a blowtorch or a hot air gun.

What robiti, how the car still did not start

Varto guess the most safe way to start the engine. For which it is necessary for the cob to start a heater, to ensure the supply of heat to the stove. However, the minus of such an addition is the high varity. A lot of car enthusiasts say that this option is to kill the filth and practically doesn’t help, they don’t cory with him.

In the most inexplicable way, the solution to the problem is the tug's call. For the help of another car, you will need to take Cheri Tiggo to the repair shop or the necessary garage, where you will have to look around for further corrections of the revealed reasons.

In the end, give a heartfelt joy. Before that, how to turn off the engine, it is necessary to turn off everything that is in the cabin and beyond the electric control, after which to give the car a little more than an hour, so that it is poprated on idle wrappers. In this manner, weed out the problems with candles - the stench will be left clean.

The wart is put up to the operation of the car Cheri Tiggo, in order to avoid any possible breakdowns or malfunctions. If you check the charge of the battery, the power of the candles, the filling of the fire tank and the operation of other equally important parts of the machine, you can secure a long term of service and the constant operation of the engine, which will be built from the first time to start in winter.