Do-it-yourself trunk in a car.

Golovna Insurance When preserving a car before going fishing, fishing or just enjoying nature, most people are faced with the problem of an acute shortage of free space in the middle of the car. The shortest option The most common form of this type of supply is an expeditionary trunk that is installed on cars.

Specialized stores can promote your respect without any models of this

korisnogo pristosuvannya

It's easy to earn money.

Regardless of whether there are any luggage devices, all of them have a secret method - create a corrugated area in the cabin and ensure the transport of luggage.

And if you take into account the fact that the simplest version of an expeditionary trunk on a boat, made by an unknown manufacturer, is expensive, the preparation of such a device itself becomes suitable for current nutrition. See vikorist materials The main thing is to get to the expedition trunk - this is not a big deal.
Therefore, the optimal material for the manufacture of such a wooden device is considered to be aluminum: it is light, does not bend and is durable, so it is ideal for making a trunk for a car of any kind.
Considering that the jumpers are placed one way at a time, you will have to weld more jumpers into the frame, which will guarantee that the trunk of the car will be reliable and valuable.
Additional value of the structure is provided by fastening with a profile pipe by welding a jumper between each other.
You should think about the aesthetic appearance and aerodynamic performance, which poses problems with the arc on the front surface.

We select the material, determine the required dimensions, adding 5 centimeters along the edge, and carefully make an incision at the corners and bend the required depth.
Then the arc is applied to the base of the trunk, cut around the perimeter and attached to the welds, and to strengthen it, we weld a jumper.
Before preparing the sides, the stench will disappear.
To do this, open and insert bushings of the required diameter in the fastened traces.
After this, weld the fastening area, otherwise the profile will be damaged when the bolts are tightened.
The middle sides are made from wedge posts approximately 6.5 centimeters in length, of which 8 pieces are required. To be able to fasten the welded fastening studs, it is necessary to drill a pair of openings, insert the studs into them, and weld them before the openings. After this, you can cut out the required thread and screw the pins into the slots.

Now you can start preparing the crossbars that are missing.

The front bends according to the principle of preparing the arc in front.

To secure the upper crossbar, the animal is welded into the crossbar in the same place as the bushing, and then a pin is welded onto it.
The cross member at the rear is arranged in the same order.
You can secure the shovel and juice that will be at hand in the future.
If you secure the bumper to the nails, then when driving in the forest you may suffer damage to your windshield.
In the middle, the trunk itself can become a vehicle's hem and take a blow from the tree that has fallen.

Come out now DIY car trunkNot only will it help you protect the space in the middle of the car, but also save your transport safety.

If you carefully open it up, then you can safely accommodate a large amount of important and voluminous value.

And if you accurately adjust the technical parameters, you will not allow whistling noises and vibrations to occur during high-speed driving in a properly maintained vehicle. It is important not to forget about the importance of fastening devices; they can come in handy at any time and help solve the problem of fastening speeches reliably and compactly. Even if the items are carefully placed and tied to the luggage, they do not interfere with the travel time and do not disrupt the dynamics of the car.

Top trunk - what is it?

Functional element daily car What part is unnecessary, what kind of harm is greater, lower cost? You can go through the process endlessly, even if you use your own methods of operating the machine. It seems that the transportation cost is only to get to work in France, and to get home in the evening. And others cannot imagine their life without active sports: cycling, skiing and snowboarding. The remaining category of people, perhaps, will most require the establishment of additional space for fastening large objects. Before speaking, you can prepare an expedition trunk in the garage with your own hands. What is the required trunk for your car?

Not at all

today's cars
arc-crosses.

The first ones are compact and may be more attractive external look.

Until then, the stench steals your speech from the saw, the plank, the snow and the wind of the bright sun.

However, the buildings can contain significantly fewer speeches, lower arc-crosswise, and it is practically impossible to prepare them on your own.

And the other option is more functional, and it’s also difficult to make with your own hands.

Today's manufacturers more often produce combined types of luggage racks. So, for example, in one design you can fit a box and a trimach for bicycles and other sports equipment. In fact, you can buy such devices in specialized stores, but making them yourself is practically impossible.

Pros and cons of expedition racks
If you still don’t realize that you need a trunk from a similar place, get to know the advantages and disadvantages of this part.
Positive sides
The expedition trunk is obvious:
it allows you to transport more speeches;
protects the animal from external harm;
It is possible to transport large items;
with reliable fixation, vantage will not occur;
objects to be transported must not block the view of the water;

there is a place near the car interior;

For certain body structures, it is possible to increase the volume of the interior for the sake of the luggage compartment, which is disputable;
you can install a gas cylinder in the standard trunk by clicking on it;
It’s difficult to make such a part with your own hands
Unfortunately, there is such a trunk and negative consequences:
The range of items to be transported is limited by the vehicle's weight;
fuel consumption will increase by 2 liters per thousand kilometers for an empty trunk installed;
have a chance to report singing physical movements, raising the vantage to the height of the machine;
with an over-the-top surface of the trunk and poor fixation, you can waste some of your speeches;

The need to install an expeditionary trunk depends on the specific operation of the vehicle.

If you often go up in price, like to ride bicycles with your family and friends, or do gardening work, then a similar element of the car will be irreplaceable for you.

In the case of a mother who has fallen ill, such a trunk will also not be visible, but it can always be dismantled and stored in the garage, and, if necessary, put back. How to build a trunk with your own hands

Expedition trunk
You can earn it using two methods:

weld a metal structure with sides and bottom; prepare cross bars for the rails..

Rails are like railings installed on the back of the car.

Vantage of a simple form can be attached to them directly, but this may damage the lacquer coating.
Unfortunately, roof rails are available on some car models, some may need to be prepared
new design
If you plan to stick to the method of fastening the crossbars to the rails, the whole process can be intelligently divided into several stages:
selection and purchase of necessary materials and tools;
changing the parameters of the car;
folding chair design;

preparation across;

preparation of fastening;

assembled design; installing the trunk in its place. Due to the fact that the roof rails are not integrated into the car’s design, a folding trunk may need to be welded.

However, in order to properly approach the situation, it may take no more than one day before the finished structure is installed on the car.

In addition to the metal itself, you will need other materials and tools.

It is clear to them:
cooking apparatus
grinder for carving metal;
clamps for car mufflers;
mounting pin;
equipment for grinding;
wrinkled fabric with a thickness of at least 300 g/sq.m;

automobile farba (behind the basket).

As far as farbi goes, you can choose from the car body colors, or you can opt for the classic black or silver color.

Freeze the structure and folding chair In order to prepare the cross bars, you will need to move between the rails..

And the axle for preparing a folding structure must be determined by the dimensions and weight of the luggage rack, and therefore the folding of the project.

Where to find the materials you need.
To prepare the armchair for the next week, you need to accurately measure the length and width of the dahu.
After creating the seat, on which the following elements of the trunk are attached:
parameters for the frame structure;

dovzhina and re-stuffing the jumpers to make the vibration stronger;

trunk bottom;

height of the sides of the structure.

When designing a design, respect the current moment: trunks of a rectangular shape are negatively displayed on the aerodynamics of the car.
It is therefore recommended to make the front side more streamlined.
First method: preparing the cross and fastening
Let's get started with the preparations first.
Check in with them until the chair, and then get to work.
Using a grinder, cut two crosses of the necessary dowry.

Make sure that the stench comes out to the next level.

Carefully apply mounting foam to the metal in the middle and end.

Check the hardened tip. Now use a sanding machine to sand down all the edges and give the cross-sections the required shape. For two or three balls, cover the virobi with sklotkanini.

Make a selection of colors.

Video: preparing the cross and fastening it to the rails

Another method: preparing a folding expedition trunk

Another method is best suited for the preparation of luggage racks intended for utility vehicles.

It follows a slightly different procedure, so that you can create a more foldable structure with a bottom, stiffening ribs and sides.

What is the best way to go if you are transporting large volumes of traffic or your car does not have roof rails to which the crossbars can be attached.
It is important to take note of the prepared seating.
Requires the completion of all structural elements.
Using a grinder, grind the metal to prepare the frame of the structure.
You may have two late and two transverse metal cuts for the lower and upper parts of the structure.
Weld the metal tubes together in such a manner that you get two straight pieces that meet the parameters of the gas.
The lower rectangular frame is reinforced with stiffening ribs, spreading them across the structure on the same side, one side at a time.

When attached to the lower frame, you can add a wire mesh.

Now connect the upper and lower rectangles, thus forming the sides of the trunk.

Why do you need metal pipes with a smaller diameter?

Prepare a pair of metal cutting tools with a length of 7 to 15 cm, lying down in the depth of the trunk.

Spread them symmetrically on all sides of the rectangle, and then weld the upper and lower parts of the trunk.

Photo instructions for making an expedition luggage rack with bottom and sides

Additional attachments for expedition trunk

Tsikavo, what on roof rack You can additionally install several devices to make life easier with water.

So, for example, if you often visit the dacha and carry special equipment with you, the design can be equipped with special fastenings for a shovel. This fastening can be used during fishing trips to secure the fishing rod. You can also easily install a mount for a radio antenna on the trunk, which will significantly improve signal reception.

If you often ride around the place, in places with great purchases of trees, then you need something like branch beaters. One of their sides can be secured to the frame of an expedition trunk and save lobovsklo vid ushkojen. But the most popular additional element of this car is a lighting element called a chandelier.

There are nearby headlights that illuminate a larger expanse in front of the car, less immediate and distant lamps.

Lots of people to install on the trunk

fog lights

However, the principle of supplying and dispersing light in them is not very suitable for illuminating the animal.

Today you can easily find special lamps for the upper parts of the light on sale.
As you know, making your own trunk is far from the best the procedure is simple
As a rule, about this already added a virobnik. If you are experiencing difficulties, contact Cybermag consultants, they will help you earn money correct choice
You can buy a mount for the trunk of your car, so it can actually be installed on your car.

Another point, which is surprising, but still necessary to talk about, is to read the instructions.

All luggage racks come with instructions for assembly and installation.
And get to know her carefully, because in our practice there were episodes when people came after a recent self-installation with a tattered car body.

· In hundreds of cases, the stench was taken up by the robots without reading the instructions.

· Installation rules If you continue to follow the instructions, you will not have to face any difficulties.;

· It is necessary to gradually remove the luggage system, and then gradually install it on the floor, securely fastening it at the skin stage.

· Varto follows a number of rules for attaching the trunk to the car:

tighten the fasteners as much as possible, but do not overdo it, so as not to damage the trunk itself or the body; try as much as possible admissible navantazhenya
vikorist all parts that could be stolen from the car body; Do not check the trunk and do not change the position of the vehicle until the installation is completed. It is often the case that the power supply is at fault, where the trunk arches may be installed. .

Of course, everything should be kept in line with the size of the machine, but the classic one is a stand of 650-750 cm. This is the best option for comfortable movement of vanities different type So, try to invest in this parameter.

After everything is installed, you can also hang
dodatkove obladnannya
, for example, devices for transporting liquids, bicycles or plastic

Rails are a device on a car that gives it a unique appearance and color.

technical characteristics

Making cross bars on the rails with your own hands is not always difficult.

To prepare them, it is necessary to take into account the characteristics of each car, as well as the individual needs of the car enthusiast. The main “plus” of fixing the frame with one’s own hands is the price, since purchased crossbars are much more expensive to put together. Also, don’t forget about the characteristics of sociality.

When transporting the smut, so that it does not fall in or collapse

emergency situation
.
Therefore, based on the materials for preparing the cross section for the trunk, it’s not so easy.
clamps for car mufflers;
As of today, weight that can be transported by car can reach 60 to 110 kg.
To create a cross section on the rails we need:
metal profile;

grinder, drill, zvaryuvannya;

fixation material (bolts, nuts, washers);

heat shrink;

hairdryer;
farba, penzlik.
Align the crossbars on the dais for installing the trunk - two parallel straight lines that are fixed on the rails.

Before preparing it, you need to correct the shape of the dahu, as well as the width. The material for them can be a metal profile, light-alloy material, or a square pipe (metal thickness - up to 3 mm). Belt for tightening the vantage

Fixation vantage sign for help:

belt fastenings (since the vantage is transported directly on the crossbars); nets (as cats get stuck);

supporting and clamping clamps (for transporting skis, snowboards, bicycles).

Also, before installing and removing the cross section, it is necessary to transfer rubberized gaskets to prevent injuries varnish coating

car body.

Below we will look at a number of options for creating a cross with your own hands.

Variants of self-contained cross-sections. This option will be more practical, since the materials that are fused into the new one can be used in more flexible forms.

Therefore, when the car collapses, practically no noise is created. However, the maximum capacity of these cross-sections does not exceed 60 kg.

Using a little bit of guidance below the method, you can lift up to 90 kg.

Ale tse vimagatime dodatkovih vitrat. To prepare the crossbars we need:

The process of preparing the cross on the rail will be simple. Golovnya - to carry out the correct calculations and not have mercy: This process of preparing the cross is quite simple and does not require special skills.

Also, the advantages of this cross-section for installing the trunk are that they can be installed on a different stand, depending on the type of items being transported, and the make of the car.

Option No. 4

Metal profile.
The transverse brackets of the trunk will be installed.
The optimal profile is 20x30 mm, do not take anything too thin, the walls should be 2 mm each.
It is also necessary to remember that the trunk is due to a smooth smooth surface, so it is impossible to paint the pipes - they are difficult to resist.
Clamps for fastening the muffler, from them you can easily make fastening the profile to the bottom.

Mounting pin.

Sanding machine.

Farba in color machine. To choose the right farb, go to the palette of the winemaker's plant, where you can find the labeling color. Prepared crosswise

Well, we’ll remove the trunk for quiet times, as they are sold at once, with two cross-sections across the road.

Shchob self-contained option In order to obtain a soft and attractive look, at the final stage we cover the profile with mounting foam and wrinkled fabric to achieve the desired new look.

Pokrokov's instructions look like this:

Now it is impossible to create fastenings to install our new trunk

to the car.

Prepared fastening

The simplest way

prepare the fastening yourself - remake the clamps for fastening the muffler practically for any car.

If you engage more, you risk not only causing harm to the trunk, but also the very soul. Besides, it’s so hard oversized vantage

, it is necessary to secure it correctly.